Mainline chassis dyno

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • K7ERG
    S2Forum Extremist
    • Mar 2004
    • 1711
    • Country: Scotland

    #1

    Mainline chassis dyno

    Anyone have any experience with this type of dynos?

    A mate is trying to work out what power he has roughly at the flywheel.
    As far as i know it measures Derived torque (FtLB) and Power(HP)

    Is there anyway to convert from the above to flywheel power.

    Thanks in advance
    Audi A6 AEL 5cyl Quattro breaking.
    Audi A5 3.0tdi Quattro Stage 2
    07947385043
  • EspenW
    S2Forum Extremist
    • Apr 2007
    • 1534
    • Country: Norway

    #2
    Among the lowest reading dynos, will supposedly read approx. the same as a Dyno Dynamics, so check estimated flywheel power from a Dyno Dynamics plot from a car with similar drivetrain and wheel power level.
    1995 RS2 on Alcohol (6.8sec 100-200km/h)
    1994 80E Avant
    1986 2L Golf 2 on Alcohol

    Comment

    • K7ERG
      S2Forum Extremist
      • Mar 2004
      • 1711
      • Country: Scotland

      #3
      No conversion then? his car is a Evo 8 with 249whp
      Audi A6 AEL 5cyl Quattro breaking.
      Audi A5 3.0tdi Quattro Stage 2
      07947385043

      Comment

      • EspenW
        S2Forum Extremist
        • Apr 2007
        • 1534
        • Country: Norway

        #4
        There are masses of Virtual Dyno data available for the EVO, as it was made by the EVO guys. Have him do a 3rd gear pull and run the datalog through VDR.
        1995 RS2 on Alcohol (6.8sec 100-200km/h)
        1994 80E Avant
        1986 2L Golf 2 on Alcohol

        Comment

        Working...