VEMS boss fitting

[jogi730]

Need a boss fitting for VEMS EGT probe.
Sent an e-mail to VEMS shop but have not received a reply. WHere can I get one please?
Many thanks
CHris

[Jamo]

Why dont you buy it from the vems shop via the basket with the fitting only option? http://shop.vems.hu/catalog/sensor-type-p-53.html

[jogi730]

Is the shop more efficient than the replies to enquiries?
Will find out exactly what one I need and place my order.
Thanks Jamo

[Jamo]

It tells you on the page what you need

[jogi730]

Doesn't tell me anything
THe probe is with mechanic so he will lwt me know.

[Jamo]

Doesn't tell me anything
THe probe is with mechanic so he will lwt me know.

I don't understand, see the bold section below

We recommend that only the sensor tip is in the exhaust stream, that is appr 18..25mm for the 6mm sensor and 10..15mm for the 2mm sensor.

"Fitting-only=no" means you want both the sensor and the fitting (as normally)
Choose "Fitting-only=fitting3parts" if you do NOT need the sensor, only the 3 part compression fitting.
Fitting-only=compressionpart contains NO SENSOR, only the small middle part of the 3 part compression fitting.
Fitting-only=blind2parts contains NO SENSOR: useful if you want to move your existing sensor (say, after tuning). A blind-plug female is provided, and a normal male-male that can be used in the next exhaust (to replace the old that is left in the exhaust, perhaps welded in)


The 3 part fitting consists of:

part1: male-male (different thread for the exhaust and the hollander)
part2: small conical part that comes between part1 and part3 to provide sealing
part3: M12x1mm female (mates the hollander-thread of part1)

[SteveH]

You can also buy similar items from eBay. Just check the diameter of the probe first to ensure you get the right one.