rs2 hubs and wheels to fit

[sam80quattro]

i've searched but couldn't find any "NO WHAT'S IT WORTH" threads.. so here's mine lol
basically i swapped a car i had for an 4.2 v8 (abz) and aftermarket management to go in my b4 80q and recently decided i'd start removing the 10v turbo on 034efi that i never got finished off (intercooler setup/mapping etc) and decided after hearing the 10v again that i need to atleast drive it on the road before getting rid of it
that noise


so i'll try and actually get to the point (and the things i wanna know the value of).
the car is currently up in the air fitted with rs2 hubs (new bearings ecp spec) they have also been machined down so that they now have the porsche centre bore as i couldn't be arsed to have every set of wheels i ever bought machined to fit the hubs. also i have a set of veloce 3.6 wheels painted gloss black and the fake split bolts removed currently fitted with 245/40/18 but a touch too big i reckon, never actually driven the car with this setup so cant give an opinion.. i had planned to get the lips polished and tap the holes and fit some fancy bolts instead of the corroded coated plastic items. they'll also come with standard rs2 discs front and rear, will need tidying up as they've been sat around for a long time, 1 front disc had a score mark, and also the handbrake shoes but no cables/calipers/carriers.

so rs2 hubs and a set of wheels to fit them, what they worth?




225/40/18 fitted here

[Sleeper_Avant]

not a lot fella, id say about £100 delivered, tell you what as im generous hows a £50 drink on top of the normal asking price? £150 my northern monkey pm me your address!

[Sleeper_Avant]

do you need a good set of 4 stud hubs and front shafts, all ABS sensors work

use em if you want...... my parents are coming down early march, 9th i think....... and i will get them to take them back and you can collect from Wallsend if you want them to use?

let me know fella

Also have disks, calipers, pad carriers all off my running B4 before i converted to 5x112

[sam80quattro]

unfortunately im not a big drinker. so im afraid i'll have to pass lol
these are more you anyway

[sam80quattro]

do you need a good set of 4 stud hubs and front shafts, all ABS sensors work

use em if you want...... my parents are coming down early march, 9th i think....... and i will get them to take them back and you can collect from Wallsend if you want them to use?

let me know fella

Also have disks, calipers, pad carriers all off my running B4 before i converted to 5x112

that would be awesome mate how much do you want for them?

[Sleeper_Avant]

gimme whatever mate, seriously, not to bothered!

would rather see them get used.

when you pick them up you will find this escort lurking in the back yard...............(the 320bhp turbo one..... the other one if you look close is a zetec on MFi, bet you never seen that before lol)

[Sleeper_Avant]

theres even a set of greenstuff pads!!!

come to think of it, i will have to come up to pick my son up the week after my parents come down, as the missus wont let them keep him sadly lol

pm me your number and i will arange dropping them off in person....... hows that for service lol

you got any B4 lowering springs lying about??

[A1QSHIP]

So are these front & rear hubs?

[sam80quattro]

awesome :-D no springs unfortunately :-( I'll pm soon as on my phone..

a1qship. yes front and rear hubs. cheers

[sam80quattro]

to be seen in a classifieds section near you soon. 4 hubs, discs, wheels, tyres, set of 5x130 bells (no rotors) and a pair of 25mm(i think) hubcentric spacers

[sam80quattro]

spacers are cargraphic 15mm hubcentrics and i believe the bells are off a 996

will be going in classifieds once i've cleaned them up and found the missing studs though a1qship has first chance at the hubs if no 1 is interested in buying it all in 1

[A1QSHIP]

RS2 suspension parts have arrived in America. Fitting to a Coupe as soon as I find a suitable B4 90 quattro sedan to donate the rear floor pan. Oh yes I can!