Just found out how sh** mine are had them cut off and looking for new ones or wondering whether to bother
How many of you use them or don't?
What's the best type
How many of you use them or don't?
What's the best type
-
-
McGard. Done.Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss -
they can all be had off. i dont bother. if someone wants your wheels that bad chances are they'll take the whole bloody carComment
-
Just what I was thinking, I use the light weight ally nuts and the steel locking ones just ain't right anyhoo
Comment
-
-
lol, you can have them off in seconds if you knock it on with a hammer instead of trying to push it on with an electric impact gun.
The ones with the spinning bit can just have the rotating bit broken off.
If they fill the wheel almost completely then they are a bit more fiddly as you cant knock anything over the top.Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
-
there are ones out there that this method does not work on , the only way we can remove them is with a mig welder
NOT a car dealer! just an S2/RS2 enthusiastComment
-
I've ditched locking wheel nuts after loosing my McGard wheel nut key and being able to get them off easily with a 19mm socket
If someone really wants your wheels they are going to get them whatever you lock them with.91 Modded 3B
14 A6 Avant Black EditionComment
Comment