beru coils

[Duffelcoat]

can do

Can you get these coils cheaper?

[fatiii]

You *might* have mentioned that when you first asked your question.

Yes you are right i want to learn maximum hp

[UrS4boy]

I am now about 600 hp with tfsi coil :/

You *might* have mentioned that when you first asked your question.

[fatiii]

No. My RS2'd AAN is running a conservative 350 crank hp (maybe more). 350/5 = 70 hp/cylinder. Not a joke, just mathematics.

I am now about 600 hp with tfsi coil :/

[UrS4boy]

Is it joke

No. My RS2'd AAN is running a conservative 350 crank hp (maybe more). 350/5 = 70 hp/cylinder. Not a joke, just mathematics.

[fatiii]

At least 70 hp per cylinder

Is it joke

[UrS4boy]

how is the 2.0 tfsi coils?what is the maximum capacity?i have 5 2.0 tfsi coils and i do now know how many hp go. thanks

At least 70 hp per cylinder

[BrianSmith_S2]

flame retardant heat shrink 135 deg c rs p/n 252-7709 (about £10 a roll)

blue sealed heat shrinkable but splice terminal rs p/n 533-667 (about 20p each)

then all you need is to borrow a good quality crimp tool and heat gun then splice in new coil wires just at the back of coil pack.

[fatiii]

how is the 2.0 tfsi coils?what is the maximum capacity?i have 5 2.0 tfsi coils and i do not know how many hp go.

thanks

[Gazmitchell]

I got the crimps and high temp heat shrink from

http://uk.rs-online.com/web/

i will try and find the part numbers... but you just need a good crimp tool and heat gun to set the crimps and splice into the existing wiring loom just behind the coil cover.

many thanks... sounds daunting but will have a butchers !!

[BrianSmith_S2]

So did anyone get a wring loom set up for the coils ? As I've got five new but they come with only the white and yellow wires ? There was a thread on it and a lst of correct bits and pieces needed to make up wiring , anyone know if they're still available.... Thanks

I got the crimps and high temp heat shrink from

http://uk.rs-online.com/web/

i will try and find the part numbers... but you just need a good crimp tool and heat gun to set the crimps and splice into the existing wiring loom just behind the coil cover.

[Gazmitchell]

So did anyone get a wring loom set up for the coils ? As I've got five new but they come with only the white and yellow wires ? There was a thread on it and a lst of correct bits and pieces needed to make up wiring , anyone know if they're still available.... Thanks

[mcandmar]

Norm i have seen is ~€100-120 each, not cheap but still 2/3rds of the price Audi wants for them.

[bilko0795]

I bought beru coils from gsf beginning of year £69 each no problems

[UrS4boy]

can do

You guys sure you're talking apples and apples here, not mixing up coil packs with OE coils?