Who can guess the engine bay changes?

[LHD_Kid]

Started off as a 3B.. what's been changed?

No prizes, but what do you see?

[mac2226]

Started off as a 3B.. what's been changed?

No prizes, but what do you see?

Swirl pot and oil catch canlooks good Chris glad it's all fitted

[Cymru1]

Oil filler cap?

[andy10v]

7A cam cover
Coil on plug
ABY airbox
ADU intake manifold
ABY IAT
Swirl pot
Catch tank
Vacuum servo?
Square strut brace
ABY fuel rail
Roose intake hoses
Samco water hoses
Home made turbo brace?
Oil cap
Cam cover cut over cam gear

Cant see but guessing

ABY ECU
Billet K26

[Error404]

Also,
EPAS
ABY intake pipe
ABY hose kits
ABY heat shields
And guessing an AAN lifting eye in there somewhere

[LHD_Kid]

Not bad... there's a bit more going on (and a little is just temporary...)

Once I have download all the photos from my camera I'll update my other thread with some details - also gearbox changes, brakes, etc...

First of all it has to drive me over 2000 km home...

[LHD_Kid]

Swirl pot and oil catch canlooks good Chris glad it's all fitted

Thanks Michael, fitted in well in the end...

[LHD_Kid]

Oil filler cap?

Only coz the old one leaked

[LHD_Kid]

7A cam cover - yep
Coil on plug - yep
ABY airbox - yep, with larger intake hole
ADU intake manifold - yep
ABY IAT - yep
Swirl pot - yep
Catch tank - yep (using oe valve and return to sump with fumoto valve)
Vacuum servo? - yep (double version from S8)
Square strut brace - yep (matches the one on the rear )
ABY fuel rail - yep (but came off an ADU)
Roose intake hoses
Samco water hoses (hoses are a mixture of Roose and Samco due to needing some custom ones...)
Home made turbo brace? - yep, but bracketing is laser cut from 6mm stainless plate (temporary studding will be replaced with stainless rod)
Oil cap - yep
Cam cover cut over cam gear yep, just temporsry, will make custom carbon one - ABY cams and cam wheel

Cant see but guessing

ABY ECU - yep
Billet K26 - yep (Albert version)

Marked your answers :-)

[LHD_Kid]

Also,
EPAS - yep (mark 4 Astra, works REALLY well and bracketing fits perfectly)
ABY intake pipe - modded 3B
ABY hose kits - kind of mixture of stuff
ABY heat shields - homemade heat shields plus the aby part still fitted to air box
And guessing an AAN lifting eye in there somewhere haha... good spot, almost like you have some kind of sixth sense! Mounted at the front to hold the cam position sensor plug - just like in the aan...

[quattro-nick]

hi chris
i think your whole new engine is installed in the car
how many hp now?

[SteveH]

PAS gone for an electric pump

[LHD_Kid]

hi chris
i think your whole new engine is installed in the car
how many hp now?

230 right now... standard ABY boost profile...

Will run it for a while like this, checj is alk ok theb change injectors and renap for 400 - 450 max... realistically 420 - 430

[dubmanted]

Bit off topic but how is electric power steering in these cars? Car looks lovely nevertheless, some very tasty mods

[andy10v]

EPAS - yep (mark 4 Astra, works REALLY well and bracketing fits perfectly)

More details please?