Hi, I have a set of blue top Bosch injectors that I need flow rates for. Anyone know what these are? Part # 280 150 967 and on the other side is FASE B1A. Thanks for any help.
Elijah
Elijah
-
91 Audi Coupe Quattro- AAN engine transplant -
34 lbs/hour @ 3 bar is the figure I have. At least those injectors are high impedance.
SS -
They are for a Ford v-6, 3.8L. See this site http://users.erols.com/srweiss/index.html
and follow the Bosch link."Nulla tenaci invia est via"Comment
-
How many cc/min is that? Sorry, I'm just trying to track down why I'm running so rich. ThanksOriginally posted by 4WheelDrifter34 lbs/hour @ 3 bar is the figure I have. At least those injectors are high impedance.
.
Elijah91 Audi Coupe Quattro- AAN engine transplantComment
-
Originally posted by elijahallens2
Dirty injectors causing internal mechanism drag and allowing more fuel to get through than should be? or something like that.....
formally RS2 +Comment
-
this is the page you need http://users.erols.com/srweiss/tableifc.htm#BOSCH94 s2 avant
aoc member 1116
Comment
-
I make that 357cc/min.Originally posted by elijahallens2How many cc/min is that? Sorry, I'm just trying to track down why I'm running so rich. Thanks .
Elijah
Given your location, I thought you were more likely to ask me how much 3 bar was.
SSComment
-
Thanks, thats a very helpfull page. I also have a set of lucas injectors but I didn't see them on that page. The lucas injectors I have are black with a light blue ring around the top and the numbers on it are D3165BA on one side and 2463 on the back side. Anyone know flow rates for these? Thanks againOriginally posted by pastures16
.
Elijah91 Audi Coupe Quattro- AAN engine transplantComment
Comment