BOV Fitment?

[neebover]

I need advice guys.. I am fitting my Turbosmart Supersonic BOV over the weekend into my 1995 S2. Where is the best place to fit it and any pics would be of great help.

Regards
Chris.

[Greg_S]

You could put in stock location, technically BOV doesnt go with standard ECU setup since all air is metered.

[quattroTurbo]

Turbosmart make a by-pass valve specifically for Audi/VW called a Kompact Series, a far better bet than a Supersonic.

[neebover]

You could put in stock location, technically BOV doesnt go with standard ECU setup since all air is metered.

Stock location? The guy fitting it for me saying it needs to be a few inches away from anything and as its adjustable it needs to be accessible? Any further information would be of great help.
Thanks Chris.

[Greg_S]

You can get to the stock location easy enough, take the top off airbox and the access bit for headlight out and you can get a spanner down there easy enough & it will save making any new pipes also. All you will need to do is block the return from the standard DV off

[neebover]

You can get to the stock location easy enough, take the top off airbox and the access bit for headlight out and you can get a spanner down there easy enough & it will save making any new pipes also. All you will need to do is block the return from the standard DV off

Cheers Greg, that's a great help! Thanks.
Chris

[neebover]

Greg, you have PM..

Chris.