7A any alternative injectors temp use?

[AUDI COUPE 20V]

hi any of you guys know what other injectors would work in a 7a temporarily the rover ones look similar?

[Greg_S]

you could try sourcing some 7A ones from a breakers?

[mcandmar]

I think there is something about them being high impedance, not the same as most injectors as far as i know. 034efi do a nice kit, if your really stuck i have 5 spare at home, i know three of them are toast but the others may work if you want to test them. I bought 5 on ebay and left all 10 i had in to be flow tested and got 3 really bad ones and 7 working ones. I was there when they tested them in the flow bench, the guy nearly pissed himself laughing when he saw the dodgy ones squirting all over the shop The worst thing about them when they fail is they leak, when installed with fuel pressure they constantly drip like a leaky tap.

[Audi Parts Guru]

I think there is something about them being high impedance, not the same as most injectors as far as i know.

The vast majority of injectors on the market today are high impedance injectors. The resistance of these should be between 12 and 16 ohms

[mcandmar]

Ahh ok i think i got it the wrong way around, stock must be low impedance as you have to bypass the resistor pack for the 034efi kit.

http://www.034motorsport.com/product_info.php?products_id=329

[panzerwagen]

034 injectors are Bosch 0 280 150 945 made to Ford's specs ....

and coded Ford PN# FISE-E9A. You will need to disable the resistor pak and get adapters for the injectors.