Thank You Paul Nugent

[Knight Rider S4]

just to say cheers to Paul(S2.central) for his help......I have now got a Home Fries chip in the S4 and what a differnce to the superchip set up that was on it ..for anybodies info stay well clear of superchips as after Paul told me the set up ...lucky my turbo is not fecked

Would recommend this to any S4 owners on here and for the money you could not buy the increases for any cheaper anywhere

The only down side is after sorting out the Wastegate spring ..i.e boost..............car was pulling like train so much i did not notice mobile speed camera van on straight that i was testing the boost on doin 90 in a 60 ..****** !!!!!!!!! will wait for the bad news in the post

[S2central.net]

Happy to see another ABY/AAN owner with an UNsuperchipped vehicle... But unhappy to see you paying the price for illegitimate use of your new software Darned unlucky and a warning to us all !

Cheers,
Paul

[mcandmar]

I can second that, my dad’s running around with my aby homefry in his S4, loves it to bits. ...even managed to scare himself a few times looking through the side windows

Which reminds me, i'll get the aan ecu in the post to you this week Paul, keep forgetting about it

Mark.

[PeteRR]

Hmmm, more and more tempted each day. :mischeif:
Are there any issue's with chipping an automatic S4 Paul? I know that the torque delivery differed to the manual cars at least. And does the gearbox use the ECU to govern the shift settings?

....Also, I've had a look around but where the hell is the ECU on these beasts?

[S2central.net]

Have to say I have never installed such an upgrade on the slushbox variant of the S4.

I do have several auto variants of stock ECU that I could use as the baseline for the same upgraded engine programming... The right stream of software is needed so that the engine ECU communicates with the gearbox ECU, but you would need a modified gearbox ECU if you wanted to modify shift points etc etc - I don't have any knowledge on the gearbox ECU side of things.

The ECU on the AAN equipped cars is in the passenger side footwell - pretty much in the floor actually... Much teasing of trim and carpet required to get to it. When you do - let me know the part number of the ECU and I'll see what I can do...