Psv And Flame Trap Cleansing

[T2Andy]

As title i did mine last night and it was full of carbon and oily gunk
and this is on a low mileage car ,so my advice is to give it a good
degrease, the flame trap is in the metal pipe at the back of the
block,remove psv and the rubber conecting pipe.I used a srong
peice of wire with a huck on the end to fish it out .

[s2driveruk]

was it full of thick yellowy gunk....mine was gross when i cleaned it out

[T2Andy]

Not yellow black sludge.

[s2driveruk]

yep mine was black too but some really orrible yellowy sh*te in there