Anyone know what these are for?

[MattS2]

Just thought I'd show off a little.
Finally got all the bits together for the RS2 conversion.
The intercooler is still fitted to another car but is all paid for.
The Miltek, airbox, downpipe, injectors and manifold are all brand new.
I'm going to put an uprated fuel pump on too.


Matt.

[Acidburn]

Looking nice, be good to see what it goes like with all that on there.

[Briggsy]

thats looks real nice! good luck with the conversion.

[4WheelDrifter]

Just thought I'd show off a little.
Finally got all the bits together for the RS2 conversion.
The intercooler is still fitted to another car but is all paid for.
The Miltek, airbox, downpipe, injectors and manifold are all brand new.
I'm going to put an uprated fuel pump on too.


Matt.

Cool. Nice collection of parts there Matt.
Are you going for a bolt-on conversion? Or for rod bending torque? Or both?

A good RS2 setup is hard to beat for road use IMHO.

[Al Wyn]

Just thought I'd show off a little.
Finally got all the bits together for the RS2 conversion.
The intercooler is still fitted to another car but is all paid for.
The Miltek, airbox, downpipe, injectors and manifold are all brand new.
I'm going to put an uprated fuel pump on too.


Matt.

Ditto Matt ive got exactly the same conversion on the go atm (have had for a while now ) havent had the time to finish it off. You should get the RS2 ecu off to Paul for a fry up with all the other bits and bobs you should be seeing 360+hp

[s2driveruk]

droooooool

[Fat Audi 80]

Still an Avant though isn't it...




Nice work buddy.

Cheers,

Fatty

[MattS2]

@ Stu ;
It's just going to be a bolt on conversion at first, plans for a bit of ecu tomfoolery will come later when funds allow.

@ Laser ;
I didn't realise Paul did the RS2 chips too, I thought MRC took care it. Definately something to consider but would a generic chip take into account the free flowing exhaust?

@ Fatty ;
Couldn't make it cleaner than yours, so had to make it faster.

Cheers,
Matt.

[UR-S4]

More work.Best clear a space !



What worries me more is where the interclooler has got to come from.............

[terrybullwon]

turbo looks good

[Ski]

The Miltek, airbox, downpipe, injectors and manifold are all brand new.

you b******d!!!