Tweet
can i buy from anyone in NZ a known to be working, URS4 N75 valve? 034 906 283 H to be precise.. Mine was fine then just stopped controlling boost correctly, if floored boost spikes (20+psi) then steadys off. If I gently get on the throttle and work up to full throttle its is okay.. Doesn't appear to be reacting fast enough. Car is good with a manual controller but not as good boost drops off alot in upper rpm, doesn't pull the same with a good N75.
Also thanks to those who came back with flywheel pilot bearing tips, I managed to install the clutch myself with patience and two decent trolley jacks! It is a 5 puk unit from ebay, started smooth as standard but 40km later im getting minor judder on 1st gear pick up. I will learn to live with it as it may improve as i run it in.
Kevin
Also thanks to those who came back with flywheel pilot bearing tips, I managed to install the clutch myself with patience and two decent trolley jacks! It is a 5 puk unit from ebay, started smooth as standard but 40km later im getting minor judder on 1st gear pick up. I will learn to live with it as it may improve as i run it in.
Kevin