1.9TDi Bolt on upgrades - Chip Tuning?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Acidburn
    S2Forum Obsessed
    • Jun 2007
    • 13459
    • Country: United Kingdom

    #16



    The engine is based on a 1z 1.9l block

    It has a std crank and rods. and Raceware head stud kit

    Standard 2.5 van pistons and deeper valve cutouts.

    Head is flowed and modded for :-224 bhp at 2 bar/29 psi of boost with low restriction manifolds fitted

    T4 Multivan injectors and a hybrid mechanical/electronic fuel pump.

    Twin inlet inlet manifold custom fabricated plenum by Russ Fellows

    1 off 4 branch exhaust manifold made by Russ Fellows from 316 stainless

    T28 ball bearing turbo running at 26 psi boost, Full custom 2 1/2" side exit exhaust system

    Charge cooler based on Cessna 152 aircraft oil cooler

    Methanol injection using Bosch fuel injection parts

    Present horse power is 250.5 flywheel and 232 at the wheels over 380 ftlb torque

    These figures are continually changing due to continuous improvments

    Current best time is 13.03 @ 107mph

    Present horse power is 250.5 flywheel and 232 at the wheels over 380 ftlb torque

    Thats the most impressive... part!

    Comment

    • shark_90
      S2Forum Extremist
      • Mar 2007
      • 1475
      • Country: United Kingdom

      #17
      Wow, that's impressive.
      1994 Audi S2 Avant - in pieces
      2006 Skoda Octavia vRS 2.0TFSi - goes fast
      1985 Audi 90 quattro - is wet

      Don't forget the East Midlands Meet -Last Tuesday of every month at 7:30pm just off M1 J28!![/COLOR]

      Comment

      • macspring
        S2Forum Zealot
        • Mar 2005
        • 6371
        • Home: Ireland Current: Wallis & Futuna

        #18
        Acidburn,

        Thank you for the information, and also to the others.

        Comment

        Working...