AEL what turbo to get 200bhp.

[K7ERG]

Bigger nozzles and remap. I have a generic chip to try first.

[MGaz]

This Thread Is USELESS with Out Pictures! plz

[K7ERG]

Chips in and boost still limited by wastegate. Feels smoother to drive and there is a difference in the way it Revs. Now for the rollers and boost set. Nozzles to follow so I can get graphs.

All good so far.

[waveydavey]

K14/16 hybrid turbo will help you!

Any more information on this Gunto? Sounds like a promising idea.

Craig, did the K24 bolt straight onto the AEL exhuast manifold?

Cheers

David

[K7ERG]

Yes bolts on. Oil and water lines need made for k24. You need also a sandwich plate as the k24 housing and ael manifold don't completely match. Fits in stock location but needs downpipe altered. All other boost pipes fit stock. I have external wastegate on a pipe from where egr valve was on ex manifold. Inlet side blocked off.

[MGaz]

Exhaust finished 3" with one box. Sounds good not much louder than standard. Revs better for sure.
Next step to get more boost and fueling.

Change of filter to a cone and reroute pipe work so filter is out of engine bay if its possible. Tight for space as the intercooler is on drivers side also maf is huge.

Well pleased with results so far.

are you running with just the rear box and no centre? or just the centre and no rear?

could you post up a video ? been thinking of removing a box or two myself :mischeif:

[K7ERG]

Just a rear.