1z power

[ross b]

So still in search of a bit more oomph, done a few bits to mine already, full service, egr blank, cleared inlet manifold, bigger injectors, and increased cold air feed size. Soon to remove cat. Spotted this online,
http://www.tdi-tuning.co.uk/car_and_...66_kw_P95.html
wondered if anyone had dealings with them. I also bought everything i need to do the evry mod. But have heard mixed reviews which have sightly put me off. any help greatly appreciated.

[Greg_S]

Anymore details on what you are refering to ...

[nesshead6]

A VW turbo diesel engine...

[targus]

is yours a early or late model 1z?
have you thought about the turbo/manifold etc from a a4 afn as thats a bolt on upgrade and with injectors/remap would be around 140bhp

[spink]

A VW turbo diesel engine...

I think Greg was referring to 'Spotted this online' and there is no link after

[K7ERG]

tdiclub forum is probably the best place to start. Is the AFN not VNT turbo? Sure the 1z is wastegate.

[Nuno Cristiano]

Last 1.9TDI 90ps that i tuned in my dyno (MAHA) measured stock 104ps/204Nm and remap 131ps/300Nm. Decat only mod.

If you need help i can help you.

[ross b]

[QUOTE=Nuno Cristiano;680860]Last 1.9TDI 90ps that i tuned in my dyno (MAHA) measured stock 104ps/204Nm and remap 131ps/300Nm. Decat only mod.

If you need help i can help you.

The thread has now been corrected, my fault! Im interested where does remaps for these 1z's now as most ive contacted say they dont do them anymore. The previous owner gave me a chip for the ecu, which turned out to be the wrong chip for my ecu. Mines a 95 with boost feed to ecu.

[Nuno Cristiano]

[QUOTE=ross b;680869]

Last 1.9TDI 90ps that i tuned in my dyno (MAHA) measured stock 104ps/204Nm and remap 131ps/300Nm. Decat only mod.

If you need help i can help you.

The thread has now been corrected, my fault! Im interested where does remaps for these 1z's now as most ive contacted say they dont do them anymore. The previous owner gave me a chip for the ecu, which turned out to be the wrong chip for my ecu. Mines a 95 with boost feed to ecu.

Your ECU have cover BLACK! Use 2 EPROM DIL28/27C512. Very easy of work.

I can support at you remap service without problems. You can send me ECU and i do the job.

[Andriux]

after remap, i was got ¬100kw and around 320Nm from 1Z 66kw

[ross b]

My ecu is a bosch, cant remember the code.All the chips are soldered in. Im a little skeptical of sending my ecu off around the world. Also i need the car daily. Has anyone used the tuning box in the link?

[jade]

My ecu is a bosch, cant remember the code.All the chips are soldered in. Im a little skeptical of sending my ecu off around the world. Also i need the car daily. Has anyone used the tuning box in the link?

No mate there is no easy way, if you want your car to work you will need one of the recommended tuners to do it for you

You could try s2central

[gunman]

No mate there is no easy way, if you want your car to work you will need one of the recommended tuners to do it for you

You could try s2central

S2central has gone a bit "A team" lately:

If you've got a problem and no one else can help, and if you can find him, maybe you can hire...............

I'm not sure if he's doing too much remapping

[ross b]

Intrigued as to why some members say this is easy to up the power on, other say not!? Am I right in thinkin I'm not getting full benefits from bigger injectors until mapped?

[Avantus]

stock 1z/ahu won't make more then a real 120-125hp imo. Turbo can't do anything more.