Black OBD plug - no 12v?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • philj
    S2Forum Addict
    • Feb 2010
    • 377
    • Country: United Kingdom

    #1

    Black OBD plug - no 12v?

    Desperately need to get this ecu immobilized, but I can't seem to get vagcom working at all. Did work, now doesn't.

    I've got 4 usb obd cables I've tried, eventually found a card reader that runs off the black plugs power and it wouldn't turn on. Had a look and there is nothing coming through.

    So, where does it take its power from? IE where would I have to trace it to? Could it just be a fuse?

    Could I be pikey and just give it 12v volts straight from the battery? Assume the other is an earth? Car runs, just badly so the ecu has power...

    Cheers
  • mcandmar
    S2Forum Zealot
    • Apr 2004
    • 5118
    • Country: Ireland

    #2
    I cant remember which fuse off the top of my head but i think its shared with the after run pump. Basically check them all as i dont think its one of the main two ecu fuses under the red cap. The fusefox cover should give you a clue..
    91CQ20v - Gone to a new home
    93UR-S4 - The Magic Carpet
    94S2Bus - The Emerald Express

    Comment

    • philj
      S2Forum Addict
      • Feb 2010
      • 377
      • Country: United Kingdom

      #3
      Didn't think they were fused, but yeah its the one clearly marked diagnostics.

      Comment

      • Val
        S2Forum Maniac
        • Apr 2008
        • 630
        • Country: Latvia

        #4
        fuse #21?

        page 38/57 from http://www.s2central.net/S2_Schematics/ABY_Wiring.pdf
        5vtq gte

        Comment

        • UrS4boy
          S2Forum Obsessed
          • Feb 2006
          • 11859
          • Country: Canada

          #5
          Originally posted by Val
          Wow. I am humbled. Don't ever remember seeing that pdf before. *THAT* was a shed load of work to complete and didn't simply fall off the back of a passing lorry.

          Kudos as ever to Paul N. (wherever he is).
          Last edited by UrS4boy; 1 March 2013, 01:34.
          RS2'd 93 UrS4 5 spd sedan
          94 UrS4 V8 6 spd manual avant

          Comment

          • andyg plym
            S2Forum Freak
            • Nov 2006
            • 4646
            • Country: England

            #6
            Originally posted by philj
            Desperately need to get this ecu immobilized, but I can't seem to get vagcom working at all. Did work, now doesn't.

            I've got 4 usb obd cables I've tried, eventually found a card reader that runs off the black plugs power and it wouldn't turn on. Had a look and there is nothing coming through.

            So, where does it take its power from? IE where would I have to trace it to? Could it just be a fuse?

            Could I be pikey and just give it 12v volts straight from the battery? Assume the other is an earth? Car runs, just badly so the ecu has power...

            Cheers
            Mine is dead too

            Comment

            Working...