80 tdi alternator belt keeps shredding!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wesgt
    S2Forum Fanatic
    • Feb 2013
    • 78
    • Country: Ireland

    #1

    80 tdi alternator belt keeps shredding!

    It's done this 4 times in the last 3 months, i've replaced the alternator pulley, and the larger pulley connected to the crankshaft, although that came off a 99 passat, could it be causing the problem? Also changed the housing with the shaft that the belt runs on also!
  • Bowie69
    S2Forum Fiend
    • Nov 2013
    • 2681
    • Country: England

    #2
    Could be the bearings in the alternator seizing?

    Comment

    • wesgt
      S2Forum Fanatic
      • Feb 2013
      • 78
      • Country: Ireland

      #3
      Someone mentioned that actually! Might just track down an alternator!

      Comment

      • wesgt
        S2Forum Fanatic
        • Feb 2013
        • 78
        • Country: Ireland

        #4
        Would there be play visible in the alternator?

        Comment

        • caterpillar
          S2Forum Fiend
          • Jun 2004
          • 2480

          #5
          have a look at the pulley i front of the engine..... its loose, or damaged, or they doest'n, line up, if not the belt will last very short....

          Comment

          • Bowie69
            S2Forum Fiend
            • Nov 2013
            • 2681
            • Country: England

            #6
            A disconnected alternator should spin pretty freely, if the bearings are on the way out they will grumble and generally not feel nice when you pin it.

            Comment

            • wesgt
              S2Forum Fanatic
              • Feb 2013
              • 78
              • Country: Ireland

              #7
              Ok I will check out all of those things, thanks

              Comment

              • sam80quattro
                S2Forum Extremist
                • Oct 2006
                • 1496
                • Country: United Kingdom

                #8
                pretty sure the tensioners are prone to fail/collapse and cause this issue

                Comment

                • kulster
                  S2Forum Addict
                  • Sep 2007
                  • 290
                  • Country: United Kingdom

                  #9
                  The tensioner usually fails

                  Comment

                  Working...