Uprated Rods GB

[VagOrBust]

If it's not to late I'd like to join this group buy. I've got a few engines to refurbish.

JEMO
VTI2 - I-Beam with ARP set of 5

FCP-Engineering
byd1380 - X-Beam riffle drilled set of 5
BN-01-wso 159mm X-Beam riffle drilled set of 5, 159mm x-beam riffle drilled set of 4 (state if there is something extra on this set of 4 meaning dimensions or part number)
jsol 159mm X-beam with 22mm pin/rifle drilled set of 5
s2coupe3b standard S2 X-beam riffle drilled
Colesy standard S2 X-beam riffle drilled set of 5
RichLV UrS4 standard (144x20mm) X-Beam rifle drilled, set of 5
VagOrBust: Standard S2 X-beam riffle drilled set of 5 and Standard UrS6 X-beam riffle drilled set of 5.

[Billman]

If it's not to late I'd like to join this group buy. I've got a few engines to refurbish.

JEMO
VTI2 - I-Beam with ARP set of 5

FCP-Engineering
byd1380 - X-Beam riffle drilled set of 5
BN-01-wso 159mm X-Beam riffle drilled set of 5, 159mm x-beam riffle drilled set of 4 (state if there is something extra on this set of 4 meaning dimensions or part number)
jsol 159mm X-beam with 22mm pin/rifle drilled set of 5
s2coupe3b standard S2 X-beam riffle drilled
Colesy standard S2 X-beam riffle drilled set of 5
RichLV UrS4 standard (144x20mm) X-Beam rifle drilled, set of 5
VagOrBust: Standard S2 X-beam riffle drilled set of 5 and Standard UrS6 X-beam riffle drilled set of 5.

Set is the same for S2 and UrS6. Means you take 2 sets.

[Thuppu]

What is the price for FCP stroker rods? I would need a kit of 5 in 155x22 size. I'll guess these would be a custom size..? Or they also could be 156x22 size.

[diesel des]

What is the price for FCP stroker rods? I would need a kit of 5 in 155x22 size. I'll guess these would be a custom size..? Or they also could be 156x22 size.

Talk to fcp direct. He did me a good price on a stroker set of rods and suitable pistons.

Sent from my HTC Desire HD A9191 using Tapatalk 2

[stin]

JEMO
VTI2 - I-Beam with ARP set of 5

FCP-Engineering
byd1380 - X-Beam riffle drilled set of 5
BN-01-wso 159mm X-Beam riffle drilled set of 5, 159mm x-beam riffle drilled set of 4 (state if there is something extra on this set of 4 meaning dimensions or part number)
jsol 159mm X-beam with 22mm pin/rifle drilled set of 5
s2coupe3b standard S2 X-beam riffle drilled
Colesy standard S2 X-beam riffle drilled set of 5
RichLV UrS4 standard (144x20mm) X-Beam rifle drilled, set of 5
VagOrBust: Standard S2 X-beam riffle drilled set of 5 and Standard UrS6 X-beam riffle drilled set of 5.
stin: X-beam 159x22mm rifle drilled, set of 5

[jsol]

What is the price for FCP stroker rods? I would need a kit of 5 in 155x22 size. I'll guess these would be a custom size..? Or they also could be 156x22 size.

He does 155mm off the shelf.

[Wizard-of-OD]

OP
do you know where these are being made?

[FCP-ENGINEERING]

Rods are made in china (the same as Manley, Scat, K1, ZRP, Integrated, Eurospec) by FCP Engineering UAB request, our drawings our dimensions, arp bolts directly bought from ARP USA.
All rods will come with invoice from our company, not privat sell. We have got super power results from customer cars, 4cyl 800-1000hp, 5cyl 1000hp, 6cyl 1200-1400hp.

Europe and USA made rods absolutly different price minimum double Pauter, Carillo, Arrow and etc.

Member Wizard-of-OD always was one of our hatters i dont know why. And he didnt need any rods.

[Wizard-of-OD]

i dont know why.

You do know why.
You have not been forth coming with your company/information.
FCP-Engineering:
- Did not design these connecting rods. These rods were designed by others and the factory is making them available to everyone else.
- Is not an Authorized ARP distributor (according to ARP)

I am not a hater , I have asked you in the past for transparency and you refuse to divulge this. All you keep saying is your connecting rod is same as "X Y Z " company so realistically what you are telling the community is that you are a copy cat who found a company on Alibaba that would sell you "proprietary" information.

Produce FEA data for your designs (YOUR DESIGNS) and an ARP account # and I will leave you alone.
Until then I will always advocate to the community that an engine rebuild costs in the neighborhood of 4000+Euro , you really going to skimp out on components to save 100 Euro as well as support an company that does not give back to the community?

P.S. Thank Pauter for that X-beam design.

[vti2]

Don't bash on somebody without knowing His product. We have Here alot of Cars Running FCP rods without Problems. From 450 to 1000hp. It doesn't Bother me wehre he has his rods, the only Thing that Counts is that they are good machined and the can take the power that is clamed By FCP. For me he could bought it from The Moon, The finished product is what it Counts. If Products from China are a no go for You, i can call Pankle an get You a set for 700€ a Peace, i'm sure they will satisfy you...

[vti2]

Uprated Rods GB

http://youtu.be/QhOAK31GY9M

http://youtu.be/PX1vtXA8ccs

http://youtu.be/ZDvalp5sgQg

Is a friend of me. Running 902HP on a Dayli driver with FCP rods

[Wizard-of-OD]

Don't bash on somebody without knowing His product.

Stop....just stop and use some common sense. I don't care where the product is made , I care about the ******** being sold to the community. I know his product.

DMF has guys on here making 800+ hp on his connecting rods. It means nothing at the end of the day. FCP Produce what I asked for and I will leave this alone.

[FCP-ENGINEERING]

All was discussed already in 2011 year and you talking the same again:

http://www.s2forum.com/forum/showthread.php?t=51386

I donot force any members to buy our products.

[Wizard-of-OD]

All was discussed already in 2011 year and you talking the same again:

http://www.s2forum.com/forum/showthread.php?t=51386

I donot force any members to buy our products.

Post #20 , 4 years ago I asked you for this data , you still didn't produce it. Now you are jumping from H/I beam to X-beam

http://www.s2forum.com/forum/showpost.php?p=569777&postcount=20

I am not trying to give you a hard time. I am simply looking for transparency. I don't have a leg in this race.

[vti2]

Uprated Rods GB

Post #20 , 4 years ago I asked you for this data , you still didn't produce it. Now you are jumping from H/I beam to X-beam

http://www.s2forum.com/forum/showpost.php?p=569777&postcount=20

I am not trying to give you a hard time. I am simply looking for transparency. I don't have a leg in this race.

If it is so, you should stay out of this Thread. It is Group Buy Thread and Not a Thread about the transparency of a Company.