Group Purchase - engine / gearbox / diff mounts from akmotorsport.net

[Albert]

Hello,

We are very happy to announce that we will be manufacturing engine / gearbox and rear differential very soon. This is initial order now.

We will have the mounts available as 75 ShA Street hardness (polyurethane in red) and 85 ShA race hardness (polyurethane in yellow) options.

Their design was made in mind for the vibration not being transferred to the chassis. Most of the mounts on the market transfer the vibration form the engine to the chassis because there is metal to metal contact.

Special type of aluminium used to avoid corrosion and anodized to make sure nothing happens.

Prices for S2forum group buy sale

Engine mounts.
up to 5 sets = £125 per set of two
10+ sets = £100 per set of two

Gearbox mounts
up to 5 sets = £110 per set of two
10+ sets = £95 per set of two

Diff mounts.
up to 5 sets £110 per set of four + rear poli for diff support
10 sets £100 per set of four + rear poli for diff support

Pictures



Set for B4 Avant/Sedan



3D

[quattrostyle]

Are gearbox and diff mounts not the same? At least on the type 85 and 3B S2?

[Albert]

Yes. There is a difference. We will also make different mounts for B2 and B4 type

[rxl]

im in for a set of gearbox mounts..

[Az786]

Will the engine,gearbox, dif mounts work on my aby s2 avant?

[Albert]

engine, gearbox will work

for rear diff mounts we have them in design and they will be ready in 2 weeks for production

[Az786]

I will take engine and gearbox mounts put me down street hardness please.

[ACQ]

I take engine and gearbox mounts if they fit audi coupe quattro typ85 with 3b engine. Street hardness

Bolts for engine mounts are included?

[Albert]

rxl - gearbox mounts
Az786 - enginie and gearbox mounts - street hardness
ACQ - engine and gearbox mounts - street hardness

[A80Avant]

rxl - gearbox mounts
Az786 - enginie and gearbox mounts - street hardness
ACQ - engine and gearbox mounts - street hardness
A80avant - engine + gear box mounts - street hardness


Sent from my SM-G850F using Tapatalk

[A80Avant]

Is this still going on?

Sent from my SM-G850F using Tapatalk

[Albert]

yes, did test fit on 3D prints this week and send the parts to manufacturing

[A80Avant]

I am very much against any vibration. Is there any chance that the polyurethane material used can match as close as possible to the OEM for those who just want to replace worn parts and can't find replacements?

Sent from my SM-G850F using Tapatalk

[Albert]

The will be a bit stiffer. There will be also aditional washers to regulate the hardness of the mounts.

[A80Avant]

Do we have any tested items and how much vibration is coming into the cabin?