Group Purchase - engine / gearbox / diff mounts from akmotorsport.net

[A1QSHIP]

In for a set of engine mounts, 75ShA street hardness.

[ACQ]

I suggest to change gearbox mounts too because if you change only engine mounts it doesnt give so much effect.

[A1QSHIP]

I suggest to change gearbox mounts too because if you change only engine mounts it doesnt give so much effect.

Already have trans & diff mounts sourced & installed.

[A80Avant]

There is also another question. Those with reverse inlet manifolds have clearance issues esp. When using the phenolic spacer for heat transfer to the manifold
Is there any chance that the engine mounts can be slightly lower in height? I'm ok with oem mounts but for example the street density 034 ones were no good at all

[add]

I'm in for a set of engine mounts,85 shA

[Albert]

Do we have any tested items and how much vibration is coming into the cabin?

it is not coming almost at all on the street version. They are designed especially in mind to not let vibrations from the engine come to the chassis. There is also extra washers to adjust the stiffness of the engine mount.

There is also another question. Those with reverse inlet manifolds have clearance issues esp. When using the phenolic spacer for heat transfer to the manifold
Is there any chance that the engine mounts can be slightly lower in height? I'm ok with oem mounts but for example the street density 034 ones were no good at all

The height of the engine mount is 90 mm measured from the place you mount the mount to top of the mount. Is that ok for you ? if not we can make one for you that is bit lower.

[Albert]

rxl - gearbox mounts
Az786 - enginie and gearbox mounts - street hardness
ACQ - engine and gearbox mounts - street hardness
A80avant - engine + gear box mounts - street hardness
A1QSHIP - engine mounts - street hardness
add - engine mounts - track hardness

[A80Avant]

it is not coming almost at all on the street version. They are designed especially in mind to not let vibrations from the engine come to the chassis. There is also extra washers to adjust the stiffness of the engine mount.



The height of the engine mount is 90 mm measured from the place you mount the mount to top of the mount. Is that ok for you ? if not we can make one for you that is bit lower.

I haven't measured the current mount. What I'll do is take the car to my mechanic and have them measured. I would then opt to have them a couple of mm shorter so as to make sure everything fits. I'll pm you the details

[Albert]

Ok, almost done. First part of the aluminium pice's arrived today. Taking them for anodizing now.

[add]

Albert,i'm going to have to pull out of the group buy i'm afraid,change of circumstances with the car,sorry,don't want to mess anyone about

[Az786]

I can't wait

[pinotattt]

Hi Albert. Are the gearbox mounts ready. I have some friends who own a tuning company who are coming to Poland next week

Sent from my SM-A500FU using Tapatalk

[sandman1111]

Any news?

Sent from my D5803 using Tapatalk

[Albert]

Sorry for late response. Hopefully tomorrow we will have 75ShA sets ready.

Sneak peek pictures bellow. Now the wait is only for bottom bushes.

[Albert]

ok. The wait is over. Red street hardness - 75 ShA sets are ready !

All made from aluminium, anodized silver.