3526 ABY crank locking tool

[S-Express]

What a great solution - the simple ones are always the best.
Where did you get the 'toothed' section from?
guess: split a ring gear from a flywheel, then heated and bent it?

[DJones]

What a great solution - the simple ones are always the best.
Where did you get the 'toothed' section from?
guess: split a ring gear from a flywheel, then heated and bent it?

I cut it out of a 2" square plate washer, its amazing what you can do with an angle grinder and file...

[S2central.net]

Amazing - nice alternative approach there...

Paul

[Jamo]

Following on from this I've uploaded Jon's pics to the gallery as the link dont work as a hotlink

http://www.s2forum.com/photoplog/index.php?n=1991

And edited jons original post to link to the forum gallery.

Going to try this on my 3526 locking tool for my aircon pulley now I have an S2 with Aircon.

[bluequattro]

Glad I found this thread, I was thinking I was doing something wrong when the bolt in my locking tool won't reach the hole in the block!
Bought tool as used off eBay-wondered why it looked so clean-previous owner couldn't have used it!
Out with the grinder to get the bolt head off then ...

[rynaqui]

We supported our tool with two large pieces of stone, we were tight on time and it worked well enough

photo (3) by ryanaqui, on Flickr

[Error404]

I welded a ring of steel to my 3B tool, now it does both

[bluequattro]

Alex, any possibility I could borrow your engine stand soon to strip my aby please?
I'm off this week do can collect to suit you, unless you want to come and pick the carcass before it goes

[Error404]

Yes mate, I could drop it round and have a look over the avant
I'm working all weekend unfortunately but I could maybe get round in the evening?

[bluequattro]

Evening is fine with me if you don't mind

[Jamo]

Ah here is the thread, I uploaded the pics from this thread into a recent thread.

I need to flog this thing and all my other I5 related stuff lying about!

[Error404]

Do us a list then sugar t1ts

[bluequattro]

Lol, I've already asked