Renewing Undertray Fixings

[Fat Audi 80]

For those of you that do want to retain the original fixings for the undertray here are the instructions for fitting your newly aquired fixings.

Unfortunately I have not got the part numbers handy - Any chance of you posting them up Jas?

You should have three captive nuts for the rear centre part of the tray that fit to the flexible metal carrier:



You should also have two plastic cage nuts that fit onto the tray itself either side:



Then you need to fit the three captive 1/4 turn fasteners to the rear of the tray with the rubber washers and plastic washer:

Outside:



Inside:



Lastly, you should have another captive 1/4 turn fastener that fits on the slots either side of the tray in a similar way to the other three:



Sorry about the quality of the pics, my camera is rubbish! (Or is the user? )

HTH

Cheers,

Steve.

[blown_vr6]

Bit Dirty under there Fats - im guessing youve been laying on your back with a cotton bud all weekend??

[Jas11n]

Thanks for thre pictures Steve, great help

VAGparts seemed to have missed sending me my washers .

So part numbers are (without the washers)

171 201 969 x 2
4A0 805 121B x 3
4A0 805 163 x 2
4A0 805 960 x 3
4A0 805 121A x 2

And the washer I'm missing are;

N 011 547 6 x 3
4A0 805 137A x 2

Jas..

[Fat Audi 80]

Bit Dirty under there Fats - im guessing youve been laying on your back with a cotton bud all weekend??

Yes bloody filthy under there. It has a small oil leak which makes it worse. I am still undecided as to whether to tackle it or not...

[Fat Audi 80]

Thanks for thre pictures Steve, great help

VAGparts seemed to have missed sending me my washers .

So part numbers are (without the washers)

171 201 969 x 2
4A0 805 121B x 3
4A0 805 163 x 2
4A0 805 960 x 3
4A0 805 121A x 2

And the washer I'm missing are;

N 011 547 6 x 3
4A0 805 137A x 2

Jas..

Nice one Jas.