When tou look on the Internet for guides on splitting the times you get 'use a lump hammer and a 2x2 pc of wood and hammer the **** out of it' or the best..... 'put a pillow on it and jump on it!!!!!!'.
I like to think I'm a little bit more sophisticated then this, here is my puller.
If any one wants to borrow it there more than welcome.
Mine are 18" (which actually turn out to be 19 7/8" at the edge) but will work on anything smaller with not much hassle.
Mine are rs2's but this method will work on any that split towards the front face of the rim.
