Flame trap

[kulster]

Hi guys I've had my full service kit, Pcv valve and flame trap delivered to my by tps today, could anyone point me to where the flame trap fits please and is it easy enough to do, I bought these items because I was told by jamo it's worthwhile doing, cheers

[Vauhtiveikko]

It is quite visible in this link when you look the etka picture in post number 2 (partnumber 5).

http://www.s2forum.com/forum/showthread.php?t=11748&highlight=FLAME+trap

It is located in the metal tube after 90degree turn...

[UrS4boy]

Hi guys I've had my full service kit, Pcv valve and flame trap delivered to my by tps today, could anyone point me to where the flame trap fits please and is it easy enough to do, I bought these items because I was told by jamo it's worthwhile doing, cheers

You don't say ABY or 3B. For the ABY it is Item 5 below.

More reading here: http://forums.quattroworld.com/s4s6/msgs/22506.phtml

[kulster]

Aby, cheers for the quick responses

[audinut]

it sits in the breather tube No 6A on the picture and is just around the bend of the pipe , the old one will be black and ****** , the new one should be a lovely copper colour , pull the old one out and pop the new one in

[UrS4boy]

it sits in the breather tube No 6A on the picture and is just around the bend of the pipe , the old one will be black and ****** , the new one should be a lovely copper colour , pull the old one out and pop the new one in

You might want to wash the 6A tube out with solvent before installing the flame trap.



Photo courtesy of Jamo