Mapping in UK, 2nd and 4th week of March.

[prj]

I think I PM-ed most people, who I've set this up with in advance and I don't think I have a lot of slots to fill, but...
Any kind of 2.2T remaps, big MAF's and so on.
As a guideline. Stage1/1+ stuff is 150-175GBP.
RS2 MAF custom maps are around 300-350.
RS4 MAF custom maps are around 400-450.
The prices include all bits of pieces (apart from MAF's), there are no hidden charges.
For the custom maps it also includes launch control with ALS and so on. Flat shift and map switching is available if needed.

I'll also happily do diesels, and newer ME7 based petrol cars (1.8T, 2.7TT and so on), as I'm bringing the gear for that as well. This means not only basic Stage 1 stuff, but also project cars - bring it

11.03-16.03 near Luton.
25.03-30.03 near Poole.

PM me or ask away...
Also, this is all serious, as I already have tickets

P.S. In both locations are full workshops with good knowhow of these cars, lifts and so on. So if there are niggles, we'll sort them.

[Henkjan]

any plans to be on the other side of the north sea?

[prj]

I will be in Spain the middle week.

If you are asking about the Netherlands and so on...
I would happily come to the Netherlands as well as Belgium, if there are enough people to warrant it.

But I don't know many people from Belgium or Netherlands, so unfortunately my hands are tied most of the time.
If you think you can find me 5 cars to do, I'll come, direct to Amsterdam

[Henkjan]

If you think you can find me 5 cars to do, I'll come, direct to Amsterdam

to Rotterdam there may be a few of us here looking for a remap.

[prj]

to Rotterdam there may be a few of us here looking for a remap.

If you think you can find a few, I'll happily do it. I usually work with workshops though, so it would be nice if one is a workshop owner

[Henkjan]

I usually work with workshops though, so it would be nice if one is a workshop owner

does there need to be a rolling road? or other tools/equipment?

[Colesy]

Do the RS4 MAF maps require a larger MAF to turbo hose? Or have you found a different solution?

[prj]

Do the RS4 MAF maps require a larger MAF to turbo hose? Or have you found a different solution?

It does. I believe Will had a custom one made up for Sonic (Andy).

[prj]

does there need to be a rolling road? or other tools/equipment?

If there is a rolling road it's nice, but if there is a good open road to map somewhere it's OK as well.
Mainly all the equipment to do repairs is needed. Lift, tools and so on. And also people who can wrench, I can't do everything on my own.
You spend 90% of time fixing these cars and 10% mapping them.

[javispa]

Hi Dmitri, just to know... where are you going to be in Spain, besides Murchante? Send me a PM if you need a place to stay in Barcelona.
Cheers!

[Henkjan]

You spend 90% of time fixing these cars and 10% mapping them.

[prj]

Hi Dmitri, just to know... where are you going to be in Spain, besides Murchante? Send me a PM if you need a place to stay in Barcelona.
Cheers!

Hello mate,
That is a very nice offer, thank you!

However, I won't be in Murchante, I will be near Gijon this time, and flying directly to Santander from the UK.
It was decided that I will work from Simons workshop. So I am afraid I will not be visiting Barcelona this time.

[javispa]

Ok, have a nice time then!! I was asking because I would probably be able to find some people interested in getting the car mapped in Barcelona area. However, I will ask some friends in case there's a chance for you to come in the future. Unfortunately Gijón is quite far away from Barcelona.
Cheers.

[Greg_S]

Will you be over later in the year aswell, mine is off the road atm

[prj]

Will you be over later in the year aswell, mine is off the road atm

Yes, of course

The Luton area is booked full now. Still have some slots for Poole.