0 - 100 Km/h in 3,8 seconds

[Jeffer]

Satruday night at an Audimeeting here in holland, I had to play with a G-tech. I managed to do 0 to a 100 Km/h in 3,8 secs I had four tries. And i think I can do quicker. I didn't had a really flashing 100% start. So next time I'm shooting for 3,6 secs.

A nice thing about the g-tech is that you can see imediatly the result on the screen. I saw that 7K launches with 100% wheelspin gave times of 4,2 secs. Starting a 4K letting the rollfirst and just before peak torque kicks in releasing the clutch full gives the best results. But It took me 2 out of four runs to figure that out.

Cheers

[Chris M]

7K launches with 100% wheelspin

In the dry??

Sounds like a good result. Once you get the launches sorted mid to low 3's should be possible. Watch out Tom!!

Cheers,
Chris

[Jeffer]

Yes in the dry

This is what happens if you just keep your right foot in the carpet Perfect donuts
Serious the most difficult thing is to keep traction. The torque spike makes it really difficult to make a good start. Its either 4 smokin tires or a burnt clutch if you try to make fast starts. Even in dry!

[charlie]

That is very impressive. It sounds like u have masterminded
your driving technique.
Is it possible to drift a quattro???
Don't crucify me.

[Jeffer]

Oh yes you can drift a quattro. Ask Tom :mischeif: I drove a lap with him in the S2 going sideways as much as possible at Castle combe. Then we got a warning from the Marshall

[S2 Ant]

Ever tried launching in 2nd?

[Jeffer]

Yes thats a good way to ruin your clutch.... Not advisable

[charlie]

What clutch would you recomend that is both driver friendly
wallet friendly and strong.

[Jeffer]

I use a spec clutch. It works ok. But theres no more margin in there for more power.
Ask some guys that use the clutchnet clutch. Its cheap and strong AFAIK

[palles2]

I can get a sintermetal, strong fore 1250 nm,

cost 3333 euro, with rs2 flywheel...

[charlie]

I can get a sintermetal, strong fore 1250 nm,

cost 3333 euro, with rs2 flywheel...

Did you say 3333 euros ??? as in 3,333 euros.
I,ve already sold one kidney to rebuilt my engine.

[Jeffer]

3333 euro's!!!!

*****, thats a lot......
I have a homemade flywheel and a spec clutch with can be upgrade to stranger.
Flywheel 275 euro's and clutchkit somthing like 400 euros

[Sweeper]

Jeffer: I was trying to get your friend , wanted to buy flywheel. No response . Can you help ?

[Jeffer]

Jeffer: I was trying to get your friend , wanted to buy flywheel. No response . Can you help ?

No response???
Mail me at jeffer at highoctane.nl and I'll sort it out.

Cheers

[prosty]

Is the RS2 flywheel single mass or double mass? I mean if it's double mass you still have to change the wheel when exceeding 600nm..
Regards to the topic. Great run, I pulled of 3.85 seconds at the dragstrip. Tirespin the whole first gear. With trackbite of course. But without the wheelspin I think I can pull a 3.5 sec run.