Announcement

Collapse
No announcement yet.

My S2 Coupe. Ongoing project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • My S2 Coupe. Ongoing project

    Hi,


    Working on a project. Grey S2 Coupe without sunroof.


    Bought it as a project car with a newbuild Jonus Racing 650hp Engine, Reinforced RS2 girbox with Quaife froont dif, and so on

    I have installed MAXXECU Race on it and coverted to the 60-2 trigger system in front. Have also pulled out the old engine harness and got after run pump and fan controlled by MAXXECU.

    Converted to EPS and fitted Error404 Vacuum servo kit etc.

    Pulled out the whole interior and wrapped it with "Alcantara".

    The dash is out for the second time because im going manual heating system.

    This is the first setup for the car. Im going to get it mapped and see what I got out of it as is. Have mounted wath/meth kit on it.


    Last edited by Airwolf; 8th March 2018, 22:39.

  • #2
    ...

    Sent fra min SM-G935F via Tapatalk

    Comment


    • #3
      You have been very industries. Looks like it will be a great motor.

      Comment


      • #4
        This will be a beast

        Comment


        • #5
          This looks nasty
          Seb

          http://www.carthrottle.com/garage/CS...o-2-3-20v-abt/

          Comment


          • #6
            Lovely motor, only 'lightly modified' then
            Greg

            S2Forum.com Administrator & Webmaster

            '93 Coupe with a few tweeks

            Comment


            • #7
              Haha thanks for feedback.

              im very curious what this motor can do. I believe it will do good power, but with a very narrow powerband.

              setting the car up for Paint theese days. Made som covers for the turbo due to MOT.

              Comment


              • #8
                What color are you going for ?
                Seb

                http://www.carthrottle.com/garage/CS...o-2-3-20v-abt/

                Comment


                • #9
                  Not sure yet. Maybe a very Deep grey color

                  Comment


                  • #10
                    What intake manifold is that? Been looking for something along that line that isn't a wrap over the valve cover style like OEM but not quite the Wagner manifold. Id like to keep my radiator in stockish location. Not sure how well it would function moved around to fit a oem AAN intake manifold.

                    Comment


                    • #11
                      It's a furans based on the original runners

                      Comment


                      • #12
                        Sorry for not following this one up. Much work nowadays but the car is painted and almost complete. Im searching for the outdoor rubber trim om the doors and back.

                        startet to for my EFR 7670 with tial housing. Made a 3" downpipe and ordered a forge 44mm motorsport wastegate.

                        waiting for some other parts for my intake Rynning repo dual chamber with e-throttle and garrett core intercooler

                        Comment

                        Working...
                        X