Never seen these brackets on a Coupe before?
Attached to the body at the rear of the front subframe maybe a V6 thing?
brackets 2.jpg bracket 3.jpg
Announcement
Collapse
No announcement yet.
95 S2 Limo Replica
Collapse
X
-
Originally posted by Greg_S View PostLooks like it’s all do able and not too much that’s major,but a lot of time to clean it all up well. Good luck with the project.
Leave a comment:
-
Looks like it’s all do able and not too much that’s major,but a lot of time to clean it all up well. Good luck with the project.
Leave a comment:
-
since you have a lift it will be so much easier, just undo the prop, remove the exhaust and disconnect the brake lines/abs then drop the whole rear suspension and uprights, 4 bolts for the rear subframe and 8 on the suspension (4 each side) Will make working on it so much easier removed.
- 1 like
Leave a comment:
-
Got the Limo on the lift to get a better look.
Car body looks solid enough but that’s about it.
Subframes and suspension needs to come off and get blasted.
Fuel lines and tank straps need replaced
Oil temp switch is leaking and has no wiring.
Exhaust route is not very good and all mounts snapped.
Front struts have coilover that can maybe be saved, looks to have some sealing tape on the threads.
Radiator is leaking but horns look ok
Limo underbody.jpg
rad.jpg fuel lines.jpg strut.jpgoil cooler.jpg
- 1 like
Leave a comment:
-
Originally posted by Rikki Kitto View Post
Got a good working MAF if you need one bud off my ABY S2 message me if you need it, I was lucky enough to find a brand new one so now have 2 spare.
Great project by the way will be a rare car wne finished
- 2 likes
Leave a comment:
-
Originally posted by david1980 View Postmost of that rear suspension will probably come apart but the lower bolts are a right pita and on my few s2 avants they ended up having to be cut off.
crusty rear arms.jpg
Leave a comment:
-
Originally posted by sjw185 View PostBeen working on the Coupe getting it back on the road so only got a few jobs done on the Limo.
Needed the TFSI coils off the limo to put back on my coupe but wanted to try another ECU first.
The ECU that was fitted has some sort of RS2 tune (JK tuning) so its starting and idle was poor.
Fitted Homefry ECU and it started on first turn and Idle was good.
The coils I got with the limo were crap but still have my coupe originals so got them installed.
I can now move both cars around but just sharing a MAF
Great project by the way will be a rare car wne finished
Leave a comment:
-
most of that rear suspension will probably come apart but the lower bolts are a right pita and on my few s2 avants they ended up having to be cut off.
Leave a comment:
-
Been working on the Coupe getting it back on the road so only got a few jobs done on the Limo.
Needed the TFSI coils off the limo to put back on my coupe but wanted to try another ECU first.
The ECU that was fitted has some sort of RS2 tune (JK tuning) so its starting and idle was poor.
Fitted Homefry ECU and it started on first turn and Idle was good.
The coils I got with the limo were crap but still have my coupe originals so got them installed.
I can now move both cars around but just sharing a MAF
Leave a comment:
Leave a comment: