RS2 dynoed...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • A80Avant
    S2Forum Obsessed
    • Sep 2005
    • 10873
    • Country: Greece

    #1

    RS2 dynoed...

    hello all,
    i just returned from the dyno!MAHA version,i have no idea!

    well the dyno was made on 5th gear up to 7000rpm as i have no limiter,i told them to only reach that point.

    the results where:
    315.7BHP engine power at 6250rpm
    216.4BHP wheel power at 6250rpm

    460Nm at 3760rpm

    i have the sheet and will post it later on.
    i can say that after all the changes and 150.000Kms without fidling with the engine,the mtm chip gives it a good torgue figure and the BHP is not that off the 330 mark!
    so i must say im satisfied...until a future major upgrade im a happy RS2 owner!
  • porkkis
    S2Forum Extremist
    • Aug 2003
    • 1994
    • Country: Finland

    #2
    Do you have the smaller turbo RS2 MTM package that is advertised 330ps or so?
    -

    Comment

    • A80Avant
      S2Forum Obsessed
      • Sep 2005
      • 10873
      • Country: Greece

      #3
      i only have the mtm chip,and original RS2 turbo,yes for the 330Hp

      here is the sheet-picture
      Last edited by A80Avant; 23 June 2007, 18:10.

      Comment

      • 4WheelDrifter
        S2Forum Zealot
        • Oct 2004
        • 5773
        • Country: Devon

        #4
        Nice. About 16bhp up on a stock RS2 then.
        I see the ambient temperature is still warm and the pressure is a little low, so that will knock a bit of power off.
        SS

        Comment

        • A80Avant
          S2Forum Obsessed
          • Sep 2005
          • 10873
          • Country: Greece

          #5
          some people over the Greek Audi sports club forum are having a debate about the readings of this dyno MAHA and the results you get depending on the conditions and the drag.Most agree that the amount of drag seems to be really big even for my car which is supposed to have around 25% losses although here i seem to have more....
          any suggestions?

          Comment

          Working...