Rolling road Results

[mdm]

just thought i'd post my rolling road result up and see what you think



cars got a mrc remap with the high boost chips and a decat,

as well as 1.8t coil packs

so what you think??

[Animal Mother]

This wheel or flywheel?

[mdm]

flywheel

[Big Lee M]

I hope thats wheel as i'm sure they clame to 280bhp on a chip there ,i maybe wrong but don't quote me on that oops bit late interweb's playing up

[Animal Mother]

flywheel

Rubbish then I am afraid.

[Knight Rider S4]

Rubbish then I am afraid.

Thats a bit harsh !!




What motor you running mdm 3B ,ABY,ANN?

[AndyP]

Rubbish then I am afraid.

I think you really should say what you think, and stop beating around the bush

[Knight Rider S4]

Just checked your profile (ABY).what boost are you running ?

[Animal Mother]

Rubbish then I am afraid.

Sorry, was meant to say:

Rubbish then I'm afraid.

[AndyP]

The MRC high boost map is 1.6bar I think, you may need to do some checks though as my 3B made 260bhp on 1bar of boost. Did MRC do a health check before the re-map?

[Animal Mother]

flywheel

If they were wheel I would say you would be on the button.

[mdm]

most of the time the car is boosting around 1.4 bar, but it's never really consistence, sometimes it 1.3 or 1.2. think i need to do a pressure test, never seen 1.6 bar at all.

one thing i have noticed is that on the boost gauge the needle will stick and then flick round. now i put this down to a **** boost gauge (it was only £20) but could this explain something? To be honest i was a bit disappointed i thought it would be up nearer the 300hp mark.

the remap was a chip in the post job, so no health check.

think i may have to dig out the wideband and fit it.

[terrybullwon]

If they were wheel I would say you would be on the button.

With just a map change

Please look here,

http://www.s2forum.com/photoplog/index.php?n=1384

and read fitzys post #48

doubt you would see that on a K24 @ the wheels as the transmistion loss looks to be an average of 50bhp.

one thing i have noticed is that on the boost gauge the needle will stick and then flick round. now i put this down to a **** boost gauge (it was only £20) but could this explain something? To be honest i was a bit disappointed i thought it would be up nearer the 300hp mark.

I also had a fluttering gauge and it was a goodun, i never did get to the bottom of it, and i checked every thing!
Where abouts do you get it? at peak boost and high rpm?

[Knight Rider S4]

just pic of read out James

[terrybullwon]

just pic of read out James

Should be a set of RS2 readings to show power loss against transmission
POH!!! Dam! and fitzy http://www.s2forum.com/forum/showthr...t=rolling+road