Nice 2.2 Engine bays - Pictures Please

[s420vt]

b6 aan swop in progress.

[kinaputt]

Not my engines / pictures, but they are nice!




But i like it better clean, does anyone got a picture of a engine with a Wagner exhaust manifoil without the maf? Filter on turbo.

[UrS4boy]

Oops.

Who wants to tell the builder that if he ran 7A cams (e.g. intake cam), he could run a 7A distributor (or 3B intake cam and 3B Hall sender), and be able to move the engine back 100 mm (4") or so. That is just dumb they way it is now.

[UrS4boy]

Who wants to tell the builder that if he ran 7A cams (e.g. intake cam), he could run a 7A distributor (or 3B intake cam and 3B Hall sender), and be able to move the engine back 100 mm (4") or so. That is just dumb they way it is now.

OR if that was a post-mid-February 92 AAN with the G40 at the front of the engine, why a dizzy at all? Even if it was a pre-mid-Feb 92 AAN, there was the tuna can dizzy under the intake manifold.

All good reasons why mounting a 16V style dizzy at the back of the head is a D-U-M-B idea.

[michaels2s]

Hello this is my engine bay.....

[irishs2]

Hello this is my engine bay.....

I think you mean Turbo Bay..

Very nice

[michaels2s]

Thanks ... yeah this is more than enough for me.
Its a GTX4202 with a "smal" 0,81 Precission exhaust housing.
The housing had to be preparded to fit the turbo with the original V-Band Clamp.
Full boost is at 5500rmp running till 9000rmp pressure is 3,3bar .....
Sorry for my bad english.
Micha

[Rikki Kitto]

Finally my engine is in and working,,,,, most of the time

[K Simmonds]

Fairly standard 3B with RS2 bit's.

[jsws3]

Thanks ... yeah this is more than enough for me.
Its a GTX4202 with a "smal" 0,81 Precission exhaust housing.
The housing had to be preparded to fit the turbo with the original V-Band Clamp.
Full boost is at 5500rmp running till 9000rmp pressure is 3,3bar .....
Sorry for my bad english.
Micha

was Macht ist der Motor Herstellung ?

[michaels2s]

was Macht ist der Motor Herstellung ?

????
Sorry don"t understand

[jsws3]

????
Sorry don"t understand

What power is the engine making mate ?

[Avantus]

Ich glaube das seine Frage ist wieviel Leistung der hat

[michaels2s]

What power is the engine making mate ?

840Hp / 930NM
on Super Flow in May 2013

[jsws3]

Wow have you got a build thread on the car to share ?