PK Motorsport Radiator Shroud

[Sonic]

Has anyone got one of these carbon radiator shrouds for the reverse inlet manifold?

http://www.pk-motorsport.de/TEILE_BILDER/Bild147.jpg

Im just after peoples opinions on how good they are

[Jamo]

I missed out on one on ebay I was gutted, problem is it's a lot of cash for a piece of carbon new from PKM

[Sonic]

Im really going to have to learn how to do this carbon fibre stuff.. license to print money!!

Would anyone be interested in the air inlet / turbo separator? Id consider getting the 3-piece kit and selling it on if so, because i have an airbox so its useless to me.

http://www.pk-motorsport.de/TEILE_BILDER/Bild390.jpg

[Jamo]

hmmmmmmmm

[A80Avant]

that inlet separator is only usefull if you plan to put the maf somewhere there above the fender

[Audi-Porsche Avant RS2]

Hello, under my RS2 I have the PKM chips for 370 hp, I know that PKM have also the reverse inlet manifold, but is it the same as Wagner or not? Have PKM also a upgraded exhaust manifold for original KKK K24/7200 turbo of the RS2 as have Wagner or not? And what about a bigger intercooler that is good for combination with the reverse inlet manifold? I have not seen this parts on PKM site, for now.
Thanks a lot!
Bye

Alessio

[monstereddie]

It is always the same thing. People do not respect others people work, they copy their ideas and their "property". Carbon Fibre is very hard to do, you need a model, then making a mold that is vacuum or autoclave resistant and this is very very expensive. After this is done you need to do all the laying, and working with a very expensive material.

Do you really think it is fair to copy other peoples products? Why dont you copy money bills, this is much easier and maybe no one will see the difference. There is a bunch of very very good printers at the moment and the paper should also not be the problem?!?

Peters Stuff is always amazing. Whatever comes from his direction it is always a proof of quality and love for these cars. No Matter what. Me myself as Owner of a Tuning Company can say, that he is the best - and you all know my works. THIS is how the rabbit is running.

[Jamo]

It is always the same thing. People do not respect others people work, they copy their ideas and their "property". Carbon Fibre is very hard to do, you need a model, then making a mold that is vacuum or autoclave resistant and this is very very expensive. After this is done you need to do all the laying, and working with a very expensive material.

Do you really think it is fair to copy other peoples products? Why dont you copy money bills, this is much easier and maybe no one will see the difference. There is a bunch of very very good printers at the moment and the paper should also not be the problem?!?

Peters Stuff is always amazing. Whatever comes from his direction it is always a proof of quality and love for these cars. No Matter what. Me myself as Owner of a Tuning Company can say, that he is the best - and you all know my works. THIS is how the rabbit is running.

Who said anything about copying?

[Prophet_dlx]

It is always the same thing. People do not respect others people work[...] Me myself as Owner of a Tuning Company can say, that he is the best - and you all know my works. THIS is how the rabbit is running.

What work do you mean, on your own car or on your customers cars, as there seems to be quite a difference.
Now show us where anybody wants to copy Peter Kowatsch's work in this thread, just a guy who wants to aquire a skill, he might be slightly underestimating the difficulty of though

cheers

Philippe

[Jaap]

Im really going to have to learn how to do this carbon fibre stuff.. license to print money!!

Would anyone be interested in the air inlet / turbo separator? Id consider getting the 3-piece kit and selling it on if so, because i have an airbox so its useless to me.

http://www.pk-motorsport.de/TEILE_BILDER/Bild390.jpg

I do

[Sonic]

It is always the same thing. People do not respect others people work, they copy their ideas and their "property".

I was simply asking for opinions on his work as i am interested in BUYING a set of carbon shrouds!

Nobody has mentioned copying or cloning anyones work - so please dont jump to conclusions.

I'll take your action as a positive opinion of them though

Carbonfibre is fantastic stuff, which is why i showed in an interest in learning how to make it, everyone has to start somewhere, right?