Can anyone tell me if this is right or not? To me as someone who has never had to push a bearing onto a front hub i just can't see how these parts will fit.
The top of the hub has an outside diameter of 43mm
and the bottom part below the shoulder has a diameter of 45mm
The bearing measurements are inner diameters of 39mm
and 41mm As a newbee,this lookswrong.
I know they are a press fit but not a 4mm difference surely.
Has anyone got a measurement for their S2 front hub bearing surfce and also if they know what the bearing inner diameters should be?
The front bearings were ordered of a S2 avant reg from audi i have pt no 893 407 625c
Hubs from Quattro corner.Pt no in picturer.
here are some pictures. Cheers.
The top of the hub has an outside diameter of 43mm
and the bottom part below the shoulder has a diameter of 45mm
The bearing measurements are inner diameters of 39mm
and 41mm As a newbee,this lookswrong.
I know they are a press fit but not a 4mm difference surely.
Has anyone got a measurement for their S2 front hub bearing surfce and also if they know what the bearing inner diameters should be?
The front bearings were ordered of a S2 avant reg from audi i have pt no 893 407 625c
Hubs from Quattro corner.Pt no in picturer.
here are some pictures. Cheers.
Comment