New to me S2 project

[elijahallens2]

Hey guys, I finally have my 91 coupe S2 conversion. I will be taking lots of pics but here is the low down. Port and polished head, tubular header, 3" turbo back exhaust, WG exhaust run separate, K27/29 hybrid turbo, 11lb lightweight flywheel, centerforce clutch, RS2 injectors, RS2 MAF, Pauder Rods, multilayer steel head gasket, arp studs, mocal 19 row oil cooler, custom radiator, porsche 993 big bake front brakes with 323 porshe rotors, whiteline 18mm adjustible swaybar, H&R springs and Koni Adj. shocks. Thats most of it but this project will have no end so thank you in advance for your help.

Elijah

[panzerwagen]

Converted CQ....

You must be in the States?

[caterpillar]

Hey guys, I finally have my 91 coupe S2 conversion. I will be taking lots of pics but here is the low down. Port and polished head, tubular header, 3" turbo back exhaust, WG exhaust run separate, K27/29 hybrid turbo, 11lb lightweight flywheel, centerforce clutch, RS2 injectors, RS2 MAF, Pauder Rods, multilayer steel head gasket, arp studs, mocal 19 row oil cooler, custom radiator, porsche 993 big bake front brakes with 323 porshe rotors, whiteline 18mm adjustible swaybar, H&R springs and Koni Adj. shocks. Thats most of it but this project will have no end so thank you in advance for your help.

Elijah

HAVE you very bad turbolag when does the turbo turn on,4500rpm

[elijahallens2]

HAVE you very bad turbolag when does the turbo turn on,4500rpm

Actually, I haven't used the K27?29 turbo yet, I am waiting for the tube header. As for the tube header, I test fit it today and it hits the engine mounting bracket. I am using the 91 20V engine mounting bracket, is the S2/RS2 bracket different. Any ideas? I also got alot of the other stuff test fit today so I have a pretty good idea what I need. Here are some pictures.

[elijahallens2]

Picture of the header hitting the mounting bracket.

[elijahallens2]

Another picture.