Coupe carbon set for sale(better pictures)

[Silverboy]

can't wait

[aronmatic2]

can't wait

dont wait. i have 5 sets on stock. you can pick up tomorrow morning.

wait for desmos write. he will explain everything.

[Silverboy]

oki, sent you an PM, next set to me

[desmo888]

S2 cf fitment

Sorry for the delay mates, here is a lame webpage I made for the trim.
A note I did not mention on the page yet, the aux gage panel does not allow the gages to be recessed into the panel like the stock piece.
Instead the gages sit proud on top of the cf piece. This does not appear to be a probelm unless you removes the covers (like me) to install white faces.
When I reinstalled the white faces I did not get an even crimp all around the instrument. This will show if you have done the same.
Here is the page: http://mywebpages.comcast.net/desmo888/coupecarbon.html

I also had a couple studs on the front door piece that did not align. We (aron and I) are trying to determine why.
The rear side piece is with another U.S. buyer for fitment check. More to come...

Cheers!

[4WheelDrifter]

I've had the same problem on the front left hand trim. I had to knock off all but two of the fixings to move them. I'm just waiting for the resin to cure. The other trims are fitted. But I had to shorten most of the studs, especially on the rear trims.

[aronmatic2]

I've had the same problem on the front left hand trim. I had to knock off all but two of the fixings to move them. I'm just waiting for the resin to cure. The other trims are fitted. But I had to shorten most of the studs, especially on the rear trims.

i dont know what can be differente. i installed 3 coupes here without problem.
i sold lot of sets to germany.there was problem with 2.
dont know. maybe magic.

[4WheelDrifter]

All the studs apart from the two at the front just needed moving about 10mm forward. It's like the template used to position the studs had moved. But only on the front left trim.

[prosty]

Looks great. Time to make them for the Avant / Sedan maybe :-)
In that case sign me up for a few

[aronmatic2]

we will make some on wintertime.

[LHD_Kid]

Hi,was wondering, would these still be ok for a left hand drive?
I figure the problem piece would be above the glovebox.
What do you think?
Thanks,
Chris
(That is, if you have any left)

[LHD_Kid]

OK...I am an idiot....
I have just read all the thread, and they are LHD
do you still have any?
Are you in Hungary?
Can I pick up a set maybe when I drive home in a fe weeks time?
What would it cost total to post to UK?
Thanks,
Chris

[aronmatic2]

OK...I am an idiot....
I have just read all the thread, and they are LHD
do you still have any?
Are you in Hungary?
Can I pick up a set maybe when I drive home in a fe weeks time?
What would it cost total to post to UK?
Thanks,
Chris

i sold all, but i will have 10 more sets 2 weeks from now.
insured shipping to uk 30euro.
or you can pick up personal.

desmo888 gave me a good measurement, we replaced the bolts from bad position.
now all the bars in good position.

guys are working:

[LHD_Kid]

excellent, well, can you PM me when you have them and we will sort out payment.
Thanks,
Chris

[Volkcar]

I have a 91 USA quattro, will this fit my car

[s2_bo]

Aron do you still have any of these sets available? Or does some one in the UK have a spare set?

Thanks.
Bo