SOLD SOLD SOLD!
Hello everyone,
This one is more aimed at the kiwi buyers out there!
The time has come to move on this engine and gearbox conversion package.
It is an AEB 1.8 litre turbo 5 valves per cylinder engine and a 01A 5 speed manual gearbox removed from a 2001 A4 B5.
This conversion was intended to fit into an Audi 80 B4 which is what I removed it from, my personal car. I bought this Audi 80 with the conversion partly done. My plans were always to swap in 5 cylinder AAN, so I don't require any of these parts for sale in this post.
Included even if not pictured are as follows:
Engine, with loom (loom to be removed from Audi 80 at a time arranged with the buyer & seller as it is partially wired into the 80 loom).
Gearbox including salve cylinder and shifter rod arrangement.
Clutch and flywheel arrangement, which is brand new although has surface corrosion in places not affecting its operation (as seen in photos).
Engine ECU from the 1.8T and also a 2.8 v6 ECU from a C4 A6 for unknown reasons (v6 ecu has corrosion around the pins as seen in photos).
Main center driveshaft with bolts.
E throttle pedal and bracket to match the throttle body on engine.
Unknown, untested condition on motor and gearbox.
If you have any questions please feel free to let me know and I will try to answer them.
Contact Andre, 0272060659
Can provide more photos of this package in and out of the vehicle. Viewing welcome!
I can assist with loading, forklift available.
Pick up is from Ohakea Air Base, Bulls, Manawatu.
Looking for offers on the complete package for around $500, I know the clutch cost around this price alone.






























Hello everyone,
This one is more aimed at the kiwi buyers out there!
The time has come to move on this engine and gearbox conversion package.
It is an AEB 1.8 litre turbo 5 valves per cylinder engine and a 01A 5 speed manual gearbox removed from a 2001 A4 B5.
This conversion was intended to fit into an Audi 80 B4 which is what I removed it from, my personal car. I bought this Audi 80 with the conversion partly done. My plans were always to swap in 5 cylinder AAN, so I don't require any of these parts for sale in this post.
Included even if not pictured are as follows:
Engine, with loom (loom to be removed from Audi 80 at a time arranged with the buyer & seller as it is partially wired into the 80 loom).
Gearbox including salve cylinder and shifter rod arrangement.
Clutch and flywheel arrangement, which is brand new although has surface corrosion in places not affecting its operation (as seen in photos).
Engine ECU from the 1.8T and also a 2.8 v6 ECU from a C4 A6 for unknown reasons (v6 ecu has corrosion around the pins as seen in photos).
Main center driveshaft with bolts.
E throttle pedal and bracket to match the throttle body on engine.
Unknown, untested condition on motor and gearbox.
If you have any questions please feel free to let me know and I will try to answer them.
Contact Andre, 0272060659
Can provide more photos of this package in and out of the vehicle. Viewing welcome!
I can assist with loading, forklift available.
Pick up is from Ohakea Air Base, Bulls, Manawatu.
Looking for offers on the complete package for around $500, I know the clutch cost around this price alone.






























Comment