Stroker block and crank

[AndyP]

AEL Stroker block and crank
All work completed to convert to petrol. Needs boring to suit new pistons
Block soda blasted back to bare metal and painted with VHT paint.
Deck skimmed to clean up weld, deck height still 236.5mm
Stainless coolant socket off thermostat housing
AN6 coolant take off for turbo
AN10 oil return for turbo
Timing sensor mounting bracket
Alloy coolant socket on rear of block
ARP head studs
Rear main seal housing
Choice of TDi or petrol oil squirters
Crank has been polished and dimensionally checked.
£1250. Collection from Sheffield

2.jpg 1.jpg 3.jpg 4.jpg

[AndyP]

Sold. I still have a couple of core blocks so if anyone else wants one, please get in touch.

[AndyP]

Got another one of these almost completed, pretty much the same spec, but no ARP headstuds this time, although I can source them if required.

AEL Stroker block and crank
All work completed to convert to petrol. Needs boring to suit new pistons
Not yet painted so can be done any colour.
Deck skimmed to clean up weld, deck height still 236.5mm
Stainless coolant socket off thermostat housing
AN6 coolant take off for turbo
AN10 oil return for turbo
Timing sensor mounting bracket
Alloy coolant socket on rear of block
Rear main seal housing
Choice of TDi or petrol oil squirters
Crank has been polished and dimensionally checked.
£950. Collection from Sheffield

[PRY4SNO]

95.5mm crank?

No matter what, with all that prep work complete, that's a serious bargain!

[AndyP]

95.5mm crank?

No matter what, with all that prep work complete, that's a serious bargain!

Yes, 95.5mm crank and thanks, I thought so too!

[AndyP]

Still available. I also have a set of 155mm FCP X Beam rods, if you supply pistons I can do it as a built bottom end.

[Chris5044]

Still available. I also have a set of 155mm FCP X Beam rods, if you supply pistons I can do it as a built bottom end.

I may be interested in this in the near future. Just sorting out other things atm. Let's deffo stay in touch!!

[Joe90q]

Still available. I also have a set of 155mm FCP X Beam rods, if you supply pistons I can do it as a built bottom end.

How much built as a block ? If pistons supplied ?