Knock Off Wagner ES2 Evo Exhaust Manifolds.

[K Simmonds]

I have three fairly good quailty copies of Wagner Evo exhaust manifolds I've recently dug out whilst looking for other parts.

I forgot I had these, they were quite common about ten years ago and were for sale on eBay. I have two K26 flange and one is T3 though it started life a K26 unit it's also been home ported, all these manoflds require work to make them fit, these castings a bit rough so all the runners could do with once over with a dia grinder and one of the bolt holes on a K26 one is on the piss, the're M8 so need sorting out anyway.

One K26 and the T3 one I've aready converted to M10.

£150 a piece including delivery to a mainland UK address.

[K Simmonds]

image_89065.jpg image_89066.jpg image_89067.jpg image_89068.jpg



Some photos. It appears one of the K26 ones has already been converted to
M10 studs so is ready to use after a tidy up.

The other K26 one requires one of the bolt holes sorting out as it slipped in my pillar drill.

And the T3 one is pretty much good to go, rough around the edges but will do the job

[K Simmonds]

Just found one of these on eBay for £65 so these are now £50 each plus postage which will be around £12.

[ejfluhr]

Are you sure the Ebay option is the Wagner clone? I see a lot of S2 clones but not the a Wagner variant?

[ejfluhr]

Does the used K26 have a non-round hole, compared to the one with the stud hole problem?

[K Simmonds]

https://www.ebay.co.uk/itm/266700046...Bk9SR9zH2djDYw

[K Simmonds]

All the castings were pretty rough, I'd strongly recommend correcting any issues with a dia grinder.

[K Simmonds]

Note all studs will be removed before posting as the make them a pain to pack and I need them for other projects.

One of the K26 ones is sold pending payment.

[K Simmonds]

No contact from the guy who wanted one so all still avaiable...

I'd take £100 for the lot.

[K Simmonds]

Sold.