Last pile of 5cyl turbo bits

[steveurq]

This lot of mine was on ebay, withdrew it this morning as nobody had bid. Leaving country soon so all has to go.

AAN engine block honed, standard polished crank w. new main/b.e/thrusts

5 x Arrow steel conrods – new
5 x custom JE pistons – new
JBRacing aluminium flywheel (http://www.jbracing.com/flywheel-audi1.php#audi) - new
Spec/clutchtex clutch - new
Cylinder head ported/polished
Turbo only described as ‘huge’ – new. Cold in/out 108/80mm (o/d), hot in/out 62/69mm (i/d of flange), not sure of exact spec of this but it is good for up to 600HP.
7A exhaust cam – new
5 x green injectors
DTA model P8Pro – untested but working a few years ago and untouched since, this is a direct replacement for standard Bosch Motronic, no wiring changes required.
SX fuel pump model 18201 – new (http://www.capa.com.au/fuel_pumps.htm)
SX filter for above, model 41002 – new
Oil pump and rear seal plate - new
Various gaskets and seals including cyl head, in/exh man, front and rear block, sump
Various new bits ‘n’ bobs – temp sensor, oil filters, crank pulley/bolt.
2.5 diesel crank - needs regrind
AAN Inlet manifold
A mass of brackets/pumps (inc S4, alt/power steering etc) hoses, clamps etc etc

I have pictures if required or you can view near Dorking - Surrey.
steve@mayoregent.com

[Jamo]

Steve can you put a price on the items please

[s2martyn]

bits

i was watching these on ebay,maybe you be better off splitting them?allthough i would like them all funds dont allow at the moment...do you have any prices??

[s2bug]

Pm`d you a list!!

[steveurq]

I dont have individual prices in mind as I dont really have the time to split and post separately - I know this is not the best opportunity to maximise the money I could get but selling house/planning move abroad/clearing out/etc is quite time consuming. Maybe the S2forum members could do a sort of group buy and make me an offer for the lot, I do not want to be left with anything.... I know somebody wants the pistons/rods/head/injectors and somebody else wants the DTA.

NB - I do not have software for DTA Pro but I would imagine this is available from their website - I am sorry but I really dont have the time to research!

NNB. I have a decent nearly new mig welder, hoist, engine stand and other stuff for sale also......

[terrybullwon]

how much for the ecu?

[Robatron]

PM sent

[coneyhatchers]

s2 bits

iv got s1 swb will need spares for rallying will need spares how much the lot

[Knight Rider S4]

Were do you live?

[blurtmagnet]

how much for the welder, stand and other garage equipment?
also, do you still have the inlet manifold and crank, if so how much?

[steveurq]

Sorry for delay in replying. I will take £3800ovno for the lot including all the listed engine parts, welder, engine stand and engine hoist. NB. The ECU IS NOT a direct motronic replacement as I was originally informed, it requires a loom (and software). I am near dorking in surrey so give me a call on 07920 026660. Cheers, Steve

[steveurq]

Some prices off the top of my head. Or, all for £3800

5 x Arrow steel conrods – new £700
5 x custom JE pistons – new £700
AAN engine block honed, standard polished crank w. new main/b.e/thrusts - £200
JBRacing aluminium flywheel (http://www.jbracing.com/flywheel-audi1.php#audi) – new £250
Spec/clutchtex clutch – new £150
Cylinder head ported/polished £500
Turbo only described as ‘huge’ – new. Cold in/out 108/80mm (o/d), hot in/out 62/69mm (i/d of flange), not sure of exact spec of this but it is good for up to 600HP. £1000
7A exhaust cam – new £200
5 x green injectors - £200
DTA model P8Pro – untested but working a few years ago and untouched since - £300
SX fuel pump 18201 (good for 600HP) – new (http://www.capa.com.au/fuel_pumps.htm) £200
SX filter for above, model 41002 – new £40
Oil pump and rear seal plate – new +
Various gaskets and seals including cyl head, in/exh man, front and rear block, sump +
Various new bits ‘n’ bobs – temp sensor, oil filters, crank pulley/bolt. - all three lots for £100
2.5 diesel crank - needs regrind £75
AAN Inlet manifold £150

Call 07920 026660

[steveurq]

Bits remaining

AAN engine block honed, standard polished crank w. new main/b.e/thrusts - £200
5 x Arrow steel conrods – new £700
5 x custom JE pistons – new £700
Cylinder head ported/polished £500

Or, all four above for £1800

JBRacing aluminium flywheel (http://www.jbracing.com/flywheel-audi1.php#audi) and Spec/clutchtex clutch – all new £375

Turbo only described as ‘huge’ – new. Cold in/out 108/80mm (o/d), hot in/out 62/69mm (i/d of flange), not sure of exact spec of this but it is good for up to 600HP. £1000

7A exhaust cam – new £180

5 x green injectors - £175

SX fuel pump 18201 (good for 600HP) – (http://www.capa.com.au/fuel_pumps.htm) and SX filter model 41002 - both new - £220

2.5 diesel crank - needs regrind £75
AAN Inlet manifold £150

Call 07920 026660

[steveurq]

Update

Injectors sold.