Brackets for rs2 rear brake upgrade

[Bruno]

is there any interest for bying bracets for rs2 rear brake upgrade?
I have only manufactured for my self.
If there is interest i vill start a production of these.
The price is about 250£ or 312Euro(i think the price will be lower if i get a order of 10+)
Is for fittig porsche monoblockcaliper 996-352-421-13 996-352-422-13
Bracets are made of "SIS 2541" steel.
Rm=900-1100N/mm2. Rp0,2=700N/mm2

http://forum.vwaudi-club.no/showthread.php?t=133490

[MikeLarwood]

These fit the rear calipers from a 996 onto the rear of an S2? And with what size disc? Very interested here...

[S2central.net]

Probably only applicable to RS2 rear as it has wacky drum handbrake on the hub. I think the main benefit is better stopping power of 996 mono versus the stock RS2 rear caliper... I assume it works with standard disks - otherwise I dunno how to solve the drum/handbrake problem.

[Bruno]

This is for Rs2 only with standard 299*24 Rs2 rotors.

[Bruno]

I have new price 150£+shipping
Bolts are not included.
I used 8 pcs Porshce brake caliper bolts part no "999 067 041 09" these bolts are a little to long so
You have to cut 4 bolts to 40mm and 4 bolts to 59mm length.

[K Simmonds]

I assume it works with standard disks - otherwise I dunno how to solve the drum/handbrake problem.[/QUOTE]

I looked into doing this and even purchased the callipers. The only satisfactory solution for the UK MOT is to use a separate handbrake callipers, Willwood supply such a thing.

[Bruno]

I assume it works with standard disks - otherwise I dunno how to solve the drum/handbrake problem.

I looked into doing this and even purchased the callipers. The only satisfactory solution for the UK MOT is to use a separate handbrake callipers, Willwood supply such a thing.[/QUOTE]

I think the Willwood caliper is to big.
It was hardly enough space for the bracets for monoblock caliper.

[K Simmonds]

Ah, I see your using front callipers on the rear, I just assumed you intended to use RS2 rears callipers. I can see in your photo that locating a second calliper would be a problem.

[Bruno]

Ah, I see your using front callipers on the rear, I just assumed you intended to use RS2 rears callipers. I can see in your photo that locating a second calliper would be a problem.

No im using calipers 996-352-421-13 996-352-422-13
They are rear calipers for Porsche boxter s.
The Wilwood caliper is 174,8mm long the caliperbracet i made for my Rs2 is 160mm long.(thats maximum length)
See drawing on this Wilwood page http://www.wilwood.com/Products/001-...-cpb/index.asp
The Wilwood caliper has also mount heigth 52,9mm.
I dont think this caliper will fit.
Maybe if you mount 350mm discs or bigger it will fit.

[Jamo]

One question with these do the standard RS2 rear brakelines fit the monoblocks?

[Bruno]

Yes

[Bruno]

Remember you have to change directions on the calipers.
The bleeder screws and the pipe needs to change place.

http://forum.vwaudi-club.no/showpost.php?p=1622052&postcount=10

http://forum.vwaudi-club.no/showpost.php?p=1622061&postcount=11

[v8 coupe]

I'm working on doing this for my S2'd US spec Coupe. Basically what I figured out is the only way to do it is a separate E-brake caliper mounted on the other side of the hub. Many other cars do this with larger brakes like Vipers and the R8 (which uses a brembo caliper and is like 300ea new).

From what I can see this would not work on any of the standard S2 cars, at least not the coupes. The setup I'm looking at will use a standard 996 mono block rear caliper mounted on top of D2 A8 312mm by 25mm front rotors. I'm working on the brackets for both the caliper and the e-brake caliper as we speak so I can finish my car soon. The biggest issue is getting a L shape bracket that fits right and still gives me a decent bit of strength. I'll be making mine from steel after a few more test fits and a plastic mockup bracket.

[Bram]

This sounds good Sean. If you also would make it for the Avant I am sure you get a lot of requests to make/sell these. I would be interested at least

[vw-sc-1]

Does your system allows the rear fitment of the RS2 OE front callipers (304 discs) ?