RS4 Rear Calipers & Carrier Brackets

[twoqu]

These are for the earlier model with the 312X22 disc set up.
Good used condition.
£175.
PM if interested.

[s2bug]

Will these fit straight onto ABY?

If yes what discs etc is required.

PMd

[twoqu]

Depends what you mean really. The carriers have the same bolt spacing so they physically bolt on and position the caliper radially to suit ideally a 312X22mm disc. The calipers have the correct handbrake orientation for the avant rather than the coupe. So the challenge is to find a suitable disc!
Other than that the calipers can be used to form the basis of a more modest setup but the appropriate carriers would need to be sourced.
So if anyone just wants the calipers then I'll split them for £125 delivered in UK. They are the alloy versions with the 43mm pistons.

[twoqu]

Just had a quick look at a TT front disc and I would say with the usual bit of machining for PCD and centrebore + reduction in width would be pretty close. Offset allows a bit of room for spacing. Hmmm... anyone got any used TT/S3 front discs they want to get shot of for a dry run?

[s2bug]

PM`d again

bumpy

[Tommy200rs]

312x25 a6 disc height ~~~46mm (used disc= inaccurate measurement just as for a hint to check)

[twoqu]

Too deep! Although they have the correct centrebore/pcd. TT/Golf has 35mm which allows some room. Same offset as the 300mm discs so same principles apply.