S2/RS2 parts for sale

[A80Avant]

Update:

Parts that are provisionally sold are:

RS2 Inlet manifold : QuattroAyes
RS2 Airbox+boost gauge+RS2MA+HR S2avant springs: CREASE
Catch tank: Colesy or 93uRS4Avant (colesy has 1st interest)
RS2GT3071R kit: BigLeeM
x2 cyl heads: Casper

These parts will be ready to be shipped following payment and arrangement with each buyer.

Parts remaining are:

1: N75 valves(x1) : 30GBP

2: Narrow band lamda original S2/RS2: 50GBP (+1 used but operational for 30GBP)

3: wideband controller+LCD unit: 120GBP

4: x2 POS units : 50GBP

5: MOST likely will sell the spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 200GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.

6: x5 coil packs+ boots done 65K kms bought from VAGPARTS, working perfectly. 120GBP

7: x5 coil boots new unused and original BERU: 60GBP

all added parts include shipping costs(except the clutch kit) and will be available in the same time frame (mid march/april). Shipping to be discussed with the buyers.

[A80Avant]

Parts remaining are: (with updated prices)

1: N75 valves(x1) : 30GBP

2: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

3: wideband controller+LCD unit: 100GBP (ready to ship)

4: x2 POS units : 50GBP

5: MOST likely will sell the spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 150GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.

6: x5 coil packs+ boots done 65K kms bought from VAGPARTS, working perfectly. 120GBP

7: x5 coil boots new unused and original BERU: 60GBP

[A80Avant]

1: N75 valves(x1) : 30GBP sold

2: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

3: wideband controller+LCD unit: 100GBP (ready to ship)

4: x1 POS units : 25GBP

5: MOST likely will sell the spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 150GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.

6: x5 coil packs+ boots done 65K kms bought from VAGPARTS, working perfectly. 120GBP sold

7: x5 coil boots new unused and original BERU: 60GBP

[A80Avant]

1: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

2: wideband controller+LCD unit: 100GBP (ready to ship)

3: x3 POS unit : 25GBP (each) available in MARCH/APRIL

4: MOST likely will sell the spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 150GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.This is a good upgrade to whoever is going to be using the 3071R/RS2 mapped setup and doesnt want to spend a fortune on a new clutch kit.

5: x5 coil boots new unused and original BERU: 50GBP

6: RS2 fuel pressure regulator (3.8bar) used : 40GBP (available in March/April)

[A80Avant]

It's official, the spec 3+ clutch kit is up for sale.

On this kit, the pressure plate is reinforced, but NOT high clamp. According to my mechanics when they saw it, they said that it is probably a sachs racing unit.The disc can be easily and cheaply replaced from 034 for anyone who would like this to be pretty much as good as new. Saves the total price of one of these kits which exceeds 400GBP.

[A80Avant]

x2 cyl heads are now sold.

Stuff still to go:

1: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

2: wideband controller+LCD unit: 100GBP (ready to ship)

3: x3 POS unit : 25GBP (each) available in MARCH/APRIL

4: spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 150GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.This is a good upgrade to whoever is going to be using the 3071R/RS2 mapped setup and doesnt want to spend a fortune on a new clutch kit.

5: x5 coil boots new unused and original BERU: 50GBP

6: RS2 fuel pressure regulator (3.8bar) used : 40GBP (available in March/April)

[A80Avant]

wideband controller sold

[A80Avant]

Stuff still to go:

1: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

2: x3 POS unit : 25GBP (each) available in MARCH/APRIL

3: spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 150GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.This is a good upgrade to whoever is going to be using the 3071R/RS2 mapped setup and doesnt want to spend a fortune on a new clutch kit.

4: x5 coil boots new unused and original BERU: 50GBP

5: RS2 fuel pressure regulator (3.8bar) used : 40GBP (available in March/April)

open to offers as well.

[bad8008]

got non mechanical parts for sale? looking particularly at the Emblem / badges front and rear?

[A80Avant]

no, im afraid not.im not braking up the car,just upgrading it!

[A80Avant]

still for sale the above parts!

[A80Avant]

1: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

2: x3 POS unit : 25GBP (each) available in MARCH/APRIL

3: spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes). In contradiction to whatever has been written here and elsewhere about specs slipping and getting awfull results, mine never caused any issues. I have had it since the GT3071kit for 55000kms, hasnt missed a beat, have reached 620Nm of torgue and keeping 500Nm till 6000rpm on 3d gear pull. I will be changing to single mass flywheel and so this is up for sale.Looking for 150GBP+shipping Just to mention, i have never done 1st gear pulls, clutch has never produced any funny smells and all pulls are done from 3d gear onwards.This is a good upgrade to whoever is going to be using the 3071R/RS2 mapped setup and doesnt want to spend a fortune on a new clutch kit.

4: x5 coil boots new unused and original BERU: 50GBP

5: RS2 fuel pressure regulator (3.8bar) used : 40GBP (available in March/April)


Parts are still for sale

Once off the car, photos will be taken and uploaded.

For those who already bought the rest of the stuff, i will contact you for payment and shipping details.
parts that will go to the UK, i will bring with me to either send within the UK or meet up with the buyers.

Vasilis

[madpugger]

got non mechanical parts for sale? looking particularly at the Emblem / badges front and rear?

Ken has new ones for sale, a far higher quality than the OE ones too

[A80Avant]

x2 POS units left.

One more sold

[A80Avant]

1: Narrow band lamda original S2/RS2: 45GBP (+1 used but operational for 30GBP)

2: x2 POS units : 25GBP (each) available in MARCH/APRIL

3: spec 3+ kit for dual mass flywheel (CGR/CRB gearboxes) 150GBP+shipping

4: x5 coil boots new unused and original BERU: 50GBP

anyone interested email me @ vasilis3690@gmail.com

i will be suspending my account in a few days so i will be able to contact you only through email.
Those that have already bought/or expressed interest in the above parts, i will contact you,otherwise drop me a mail and we'll discuss

Vasilis