I forgot that I had this in a box and is another item I am unlikely to make use of anytime soon. I got this as a complete set from a 20VCQ / 7A in the states.
It is complete with the following items -
- Cruise Control Unit
- Vacuum Pump & pipes - the bracket might need modified for S2/RS2 application
- Vacuum Actuator & Link Rod (which might also need optimised for S2/RS2 fitment)
- Vent switches and pipes (at brake & clutch pedals)
- Stalk control (looks in lovely condition with no apparent scratches / gouges)
- Wiring loom - with labels to aid installation on S2/RS2
- Circuit diagram - annotated to help installation as well
I tested the loom last night and buzzed out every pin to be correct. I also tested the vacuum pump works and the actuator is airtight. I also tested both vent switches and they are good too...
This is not some random assortment of cruise components - it is everything you need for S2/RS2 installation - with the sole exception of either some modification to the vacuum pump bracket or purchase of the factory S2/RS2 bracket (small money and still available from Audi last I checked).
I will include a description of simple instructions for how to add this wiring into the S2/RS2 - it is LHD/RHD friendly - all you need to do is splice in three wires at one connector on this loom. Everything else is plug and play.
NOTE - The labels on the loom are just temporary to aid installation and need to be removed as they are not flameproof.
PRICE - £200 includes recorded postage within UK.
Pics attached :
675 - everything in the box
676 - the stalk control
678 - the control module (tucks up behind glovebox)
It is complete with the following items -
- Cruise Control Unit
- Vacuum Pump & pipes - the bracket might need modified for S2/RS2 application
- Vacuum Actuator & Link Rod (which might also need optimised for S2/RS2 fitment)
- Vent switches and pipes (at brake & clutch pedals)
- Stalk control (looks in lovely condition with no apparent scratches / gouges)
- Wiring loom - with labels to aid installation on S2/RS2
- Circuit diagram - annotated to help installation as well
I tested the loom last night and buzzed out every pin to be correct. I also tested the vacuum pump works and the actuator is airtight. I also tested both vent switches and they are good too...
This is not some random assortment of cruise components - it is everything you need for S2/RS2 installation - with the sole exception of either some modification to the vacuum pump bracket or purchase of the factory S2/RS2 bracket (small money and still available from Audi last I checked).
I will include a description of simple instructions for how to add this wiring into the S2/RS2 - it is LHD/RHD friendly - all you need to do is splice in three wires at one connector on this loom. Everything else is plug and play.
NOTE - The labels on the loom are just temporary to aid installation and need to be removed as they are not flameproof.
PRICE - £200 includes recorded postage within UK.
Pics attached :
675 - everything in the box
676 - the stalk control
678 - the control module (tucks up behind glovebox)
, but what do you think about if it is very difficult to install it perfectly in a 3B coupe ?? only doing some custom bracket or buying a cheap part from audi?? If it is yes and you have everything i need i will buy it 
, i think that it is a nice upgrade for the long and tired travels 
Comment