CT5658 3bb

[Thuppu]

I'm going for a bigger solution so my Comp Turbo has to go. It's a tripple ball bearing turbo. Specs are 56mm compressor wheel, 58mm turbine wheel, turbine housing is a custom fitted Garrett A/R.84 T3.

The center section(bearings, turbine wheel and axle) is brand new and it's water cooled, driven now only 1500km. I bought this from Repo and it's a 500+-hp turbo.

SOLD!

[mushasho!]

What I want is your manifold too... package deal?

[Thuppu]

I can give you a stainless tubular china manifold for a few extra buks. It's like this but the turbo-flange is changed to T3. The shipping fees for the whole package can be quite big to US though.

[europeanme]

does it come with all the relevant bits??...(i.e. what is in the photo of the turbo)

[Thuppu]

No, the oilfeed lines does not include. I can give you 3/8 NTP -> M16x1,5 adapters for the waterlines and a oil return flange for a hose connection. Well, I can include the oilfeed(include filter and restrictor) for an extra £80.

[terrybullwon]

Bump for a sweet turbo

(If you need Mike i can copy any lines from mine and forward on if you change to CT and only if Thuppu can not supply of course.)

[Thuppu]

Open to reasonable offers. Anyone?

[europeanme]

seriously tempted...

[europeanme]

No, the oilfeed lines does not include. I can give you 3/8 NTP -> M16x1,5 adapters for the waterlines and a oil return flange for a hose connection. Well, I can include the oilfeed(include filter and restrictor) for an extra £80.

i assume the filter is the red anodized part in the picture....

[Thuppu]

i assume the filter is the red anodized part in the picture....

Yes red/blue anodized "block" on the oil line. It also include the 0,4mm restrictor needed for BB turbo.

Pendin PM to all who interested.

[europeanme]

pm sent

[Thuppu]

PM replied...

The deal also include a 10mm DP flange and 1mm stainless seal. You also get two "Comp Turbo" stickers like in the pic on the fuel rail cover.

(Click for bigger pic)

[Thuppu]

Still here. It's going off this weekend, so ready to ship soon. Driven about 1600-1700km...


You get:

- Comp Turbo CT5658 3BB turbo ex. A/R.84 T3
- Oilfeed lines AN4 including 0,4mm restrictor and inline filter
- Two 3/8 NTP -> M16x1,5 adapters for the waterlines
- DP flange 10mm steel
- DP seal stainless
- Two "COMP TURBO Technology INC" stickers

ALL FOR 800GBP + P&P

[Thuppu]

SOLD! Thanks to all offers and to all who had interest in this.