Complete Cayenne Front Brake Setup

[205gti]

I am having to sell my Cayenne brake setup due to a change in circumstances. Up for sale is 2 Cayenne 6 pot front callipers, mounting brackets which bolt perfectly to the s2 struts, braided brake lines, 10mm hub centric spacers, Pagid pads with loads of life left and brand new EBC 345mm disks.

The callipers have had a few mm machined from the tops and bottoms as I was planning to run them under 17 inch wheels. I have mounted everything up and they cleared my 17's. The callipers could do with a repaint if you want them looking perfect as there are some marks on them and some of the paint doesn't quite match where the machining has been done. I was planning on getting them powder coated anyway. The only thing needed is 4 m12x20mm bolts to attach the bracket to the strut.

I am looking for £650. Worldwide shipping is available.

[A80Avant]

Do tu know if these cm be fitted on an rs2 setup, or 322x32 discs?

sent using Android

[205gti]

I believe they will work with the 322mm discs but I'm not sure they will work with the rs2 struts. If they are the same as the S2 then yes they will.

[A80Avant]

They are different, so I presume a different mounting bracket would be required.

Any better price for the calipers alone?

sent using Android

[Jamo]

They are different, so I presume a different mounting bracket would be required.

Any better price for the calipers alone?

sent using Android

Rs2 and S2 sturts are the same, however the hat height on the discs is difference and depending on the discs this means the S2 specifically made brackets put the calipers in the wrong place.

[A80Avant]

i suppose nothing that Kev wont be able to fix for the right price!

[Jamo]

Will @ VRS should already have drawings for this bracket

[A80Avant]

ill see if i can get the calipers first, then work out the bracket issue

thanks though!

[sam80quattro]

U can lend 1 of mine if it helps... Aswell as q7 350mm disc and it fits under 18" veloce...

[A80Avant]

you mean brackets?

[sam80quattro]

Nah I meant caliper and disc and even rs2 hub if you could get someone to make cheap brackets, then you'd just need your own calipers and discs :-D

[A80Avant]

Well if I have the calipers then I either need an rs2 bracket which can be adapted to the new calipers or the rs2 bracket measurements.

sent using Android

[Wrath]

what cayenne caliper is it? the 17zr or 18zr ?