I have a pair of reprofiled 7a cams that was removed from an engine i'm breaking. It was done by piper cams from stock 7a cams. I have the paperwork and boxes still from when they did them.
Installation data for vw audi 20v hyd max repro 1862 inl 1620 exh spec
inlet
open - 38 btdc
close - 66 abdc
dur - 284
v/l - 0.433/11.00mm
v/c - 0.000/0.000mm
f/l - 104
latdc - 0.086/2.18mm
exhaust
open - 59 bbdc
close - 27 atdc
dur - 266
v/l - 0.413/10.50mm
v/c - 0.000/0.000mm
f/l - 106
latdc - 0.073/1.85mm
rocker ratio = 1.00:1
overlap = 65deg
I'm after £180 plus post.
Installation data for vw audi 20v hyd max repro 1862 inl 1620 exh spec
inlet
open - 38 btdc
close - 66 abdc
dur - 284
v/l - 0.433/11.00mm
v/c - 0.000/0.000mm
f/l - 104
latdc - 0.086/2.18mm
exhaust
open - 59 bbdc
close - 27 atdc
dur - 266
v/l - 0.413/10.50mm
v/c - 0.000/0.000mm
f/l - 106
latdc - 0.073/1.85mm
rocker ratio = 1.00:1
overlap = 65deg
I'm after £180 plus post.
Comment