B2, B3 and S2 bits

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • martinws
    S2Forum Maniac
    • Oct 2008
    • 917
    • Country: Scotland

    #1

    B2, B3 and S2 bits

    Having a clear out of parts as im moving everything from my garage to a unit.

    Oldest stuff first:
    KV alternator- £30
    KV inlet manifold-£25
    KV throttle body- £10
    KV metering head with drilled airbox-£20
    KV downpipe with slight dent at lowest point-£20
    KV downpipe with bigger dent at lowest point- £15
    KV clutch friction and pressure plate- £40
    KV starter motor-£30
    KV ISV- £10
    Handbrake cables NEW
    (numbers on cables 0899 at811609722d& 0799 at811609721h)
    I bought these for my typ85 90Q but they look like FWD cables to me-£20Pair

    Slightly newer stuff next:
    B3 2.0E 3A engine inlet manifold with throttle body-£30
    B3 2.0E 3A engine metering head,airbox, injectors and all stainless lines-£45
    B3 2.0E 3A engine alternator-£30
    B3 coupe central locking pump-£15
    B3 Clutch flexi pipe-£10
    B3 FWD brake load sensing valve- £30
    B3 washer bottle-£10
    B3 pedal assembly with clutch master- £30
    B3 brake master cylinder with reservoir and vacuum servo attached- £25
    B3 heater controls with all cables and the center console with vents includer-£20
    B3 FWD coupe exhaust system almost new flange at bottom of DP has a bit missing but i have the piece that could be welded back in- £45

    Newer stuff again:
    S2 ABY brake bomb, came from fully working car- £25
    S2 ABY PAS pump-£30
    S2 ABY PAS lines-£20
    S2 ABY water Pump-£20 (works fine but i just changed it whilst doing timing belt)
    S2 ABY MAF-Turbo hose-£15
    S2 ABY oil cooler stainless lines-£25
    S2 ABY alternator bracket- £15

    MISC stuff:
    Typ85 exhaust stainless centre and OEM back box.
    Forward section of centre section has been shortened to fit a bodged 20vt exhaust with a cut and shut 3B 'Y' piece-£45
    UR intercooler- £45
    4x speedline split rim lookalike alloys with 4 good tyres
    1xHifly 195/65/15
    2xarrowspeed 195/65/15
    1xcontinental 195/65/15
    All with at least 5mm tread -£100


    All prices are ONO and i can get pictures of anything you want.

    Cheers

    Martin
  • PhantomS2
    S2Forum Buff
    • Apr 2004
    • 46
    • Country: United Kingdom

    #2
    I am interested in the brake master cylinder. Is it still available?
    Red S2 Coupe 1992 3B. Bog standard - Ongoing resurrection after major leak fixing program, stripped out and replaced carpet underfelt. Lovely dry, fresh smelling car now Also repaired damaged wiring loom which killed Central locking unit(s).

    Comment

    • martinws
      S2Forum Maniac
      • Oct 2008
      • 917
      • Country: Scotland

      #3
      Originally posted by PhantomS2
      I am interested in the brake master cylinder. Is it still available?
      Yes its still available

      I have PMed you.

      Comment

      • steverrquattro
        S2Forum Maniac
        • Oct 2006
        • 787
        • Country: England

        #4
        Martin,

        I've just checked and I'm sure the oil cooler lines are the same as the RS2? If they're in good nick, I'll have them.

        Mine got crushed when the engine was delivered!
        Steve

        1990 RR 20V
        1982 SWB UR - RS2 Engine

        Comment

        • martinws
          S2Forum Maniac
          • Oct 2008
          • 917
          • Country: Scotland

          #5
          All PMs replied to.

          Comment

          Working...