Breaking Audi Coupe Project Car

[MikeyB571]

He means upside down, which they are Like you say, not a problem now though.

Are the calipers for sale? Are they just standard items?

Fair enough

The calipers are standard single piston and I just reconditioned them about 6 months ago with all new seals and I even painted them.

Yes they are available, say £50 plus postage.

[MikeyB571]

Here are some pics of the sebring back box, i'll take £75 for just the back box.







And some pics of the rest of the exhaust.

[Acidburn]

lovely sounding exhaust when I saw the car yesterday mate

[MikeyB571]

lovely sounding exhaust when I saw the car yesterday mate

Thanks, I just started it up for the last time this morning with the back box off and it was loud. Might have woken the neighbors up

It's a sad day, she is now really dead. Just drained the last of the fuel out and removed the fuel pressure regulator.

[MikeyB571]

Anyway after I have dried my tears.

Here are some pics of the fuel pressure regulator, gauge and I also have the adaptor to fit the standard fuel rail so that you can run a remote setup.

[MikeyB571]

And the spit fire lead, they are 7mm twin core and cost a fortune new £50 (new price £170 http://www.larkspeed.com/index.pl?p=35WS93944&a=i)

[MikeyB571]

Here are some pics:

This is my Jenson Amplifier £40.




Got a set of clear front indicators £15.

[MikeyB571]

I have got the engine out today and more pictures

Clutch is a bit stained from an oil leak but there is no scoring at all:










Here are the plastic bits that sit under the headlamps £10:

[MikeyB571]

I have a few more bits which I never actually got a chance to use on the project as I took a different approach in the end:

I have an instrument cluster from an A4 with the ECU and ignition lock and key, reason is that the factory immobilizer is keyed to the ECU/Instrument cluster and key. £40 for the lot.





Standard near side headlamp in good condition £30:

[Turb4wd]

Brake disc

Hi do you know size of brake disc and pcd of studs if there are 108 mm please.

[MikeyB571]

Hi do you know size of brake disc and pcd of studs if there are 108 mm please.

PM sent.

[MikeyB571]

I have a set of CAT cams that I purchased for my original 12v v6 (ABC) engine, they got very little use as I decided to go in a different direction with the build:

Part number is 1003424 specifications can be found here:

http://www.catcams.be/800x600/mainframe.htm?english

clearance [cl] 0.00mm 0.00mm
duration [0.1mm+cl] 283° 283°
duration [1.0mm+cl] 247° 247°
valve lift [cl=0] 11.50mm 11.50mm REQUIRED PARTS
cam lift - -
peak angle 110° 110° followers: O.E.M.
timing [1.0mm+cl] 14/53° 54/13° retainers: O.E.M.
lift at TDC [cl=0] 2.70mm 2.70mm







These cost me £400 and are is perfect condition due to very little use. £100

[quattrostyle]

what would be the gain with these on a 2.8?

[MikeyB571]

what would be the gain with these on a 2.8?

I don't have any specific numbers, however there was a significant flow increase on my 2.6, which meant that I had to adjust the fueling significantly.

Sorry I can't give any more detail.

[MikeyB571]

Steering wheel and shocks now sold.