Strong S2, RS2 clutch kit for sale.

[aronmatic2]

I have few set of clutch kit for S2, S4,S6 and Rs2.

The kit included:

Brand new Clutch disc (cerametalic, or kevlar)
Brand new Sachs strong clutch cover
Remanufactured Single mass flywheel

Its tested in many application. Perfect for street, or track. It can hold 620NM with cerametalic disc and 570NM with kevlar.


Sale price: 750euro+shipping.

[here2learn]

2 questions due to still unsure as to exactly how my build will progress

what are the comparisons in characteristics to the spec stage 3+ clutch i do kick it hard at times.

and also would in be ok to run this on a refaced 7a flywheel

i have received some very good advice in regards to clutches and engine to hit my target speed but am looking for one to help me drive the car aggressively to enable me to feel this car break away with some hard kicks and not so gentle flicks

sorry need to add will just be stock + chip power 300hp max while i learn to get the most from the car itself

[Rusty]

Aron, is this a direct replacement for the DM setup or is it like the 3B's SM setup? i.e. Do you still need the gearbox spacer used with the DM setup? Also, what's the weight of the FW?

[Rusty]

^^^^^^^^^^

[aronmatic2]

Aron, is this a direct replacement for the DM setup or is it like the 3B's SM setup? i.e. Do you still need the gearbox spacer used with the DM setup? Also, what's the weight of the FW?

sorry mate, i am late.
I used this application all of my cars. i used with 6 speed gearbox, without the gearbox spacer. so i can say yes, you can kick the dm flywhell and install this.
the flywheel is not lightened, i can check the weight, if you need.

[aronmatic2]

2 questions due to still unsure as to exactly how my build will progress

what are the comparisons in characteristics to the spec stage 3+ clutch i do kick it hard at times.

and also would in be ok to run this on a refaced 7a flywheel

i have received some very good advice in regards to clutches and engine to hit my target speed but am looking for one to help me drive the car aggressively to enable me to feel this car break away with some hard kicks and not so gentle flicks

sorry need to add will just be stock + chip power 300hp max while i learn to get the most from the car itself

sorry but i never used spec clutch.

this is not for 7a flywheel. its a complette kit with his own flywheel.
i used this on my rally car too. i can say that was hard use. i never had problem with this, but i tryed to kill few times.

[Rusty]

What flywheel is it then? I have a 3B in mine at the moment and want to go for an 8kg flywheel with clutch that can take something like a KX500 or 3076, in case that's where I go in the future.

Flywheel weight would be a really useful thing to know.

What is the pedal weight like? 3B stock is very light, perhaps 30-40% lighter than ABY stock. Please let me know what it is like in traffic, as I currently use the car for commuting in a congested city...

[aronmatic2]

What flywheel is it then? I have a 3B in mine at the moment and want to go for an 8kg flywheel with clutch that can take something like a KX500 or 3076, in case that's where I go in the future.

Flywheel weight would be a really useful thing to know.

What is the pedal weight like? 3B stock is very light, perhaps 30-40% lighter than ABY stock. Please let me know what it is like in traffic, as I currently use the car for commuting in a congested city...

Its mich heavyer than 8kg. if you want something light, this is not yours.
Its perfect in daily use.

[Rusty]

Ok, thanks for letting me know.

[diesel des]

Do you have any photos of the back of the flywheel were the timing pin is. I use vems and ita very fussy about this. 3b works but 7a doesnt due to nearby balance holes. Cheers

[butchone]

Do you have any photos of the back of the flywheel were the timing pin is. I use vems and ita very fussy about this. 3b works but 7a doesnt due to nearby balance holes. Cheers

try 034 or fedanza aluminium flywheel the latter being far the best in my opinion

[diesel des]

Thanks but I dont need a super light flywheel. Its for a daily driver. Cheers des

[SteveH]

can you supply the metallic disk as a separate item?

[diesel des]

Also how hard is the clutch pedal. Cheers

[SteveH]

If it's the same as my Sachs SRF pressure plate...heavy until you get used to it.